[PATCH v4 12/12] ARM: dts: aspeed: anacapa: Add SPI flash VCC supply

[Colin Huang via B4 Relay]

From: Rex Fu <rex.fu.amd at gmail.com>

Specify the 3.3 V auxiliary rail as the SPI flash VCC supply to
avoid using the dummy regulator during device initialization.

Signed-off-by: Rex Fu <rex.fu.amd at gmail.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index f913fa3f622d..cb4b815f1803 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -27,6 +27,22 @@ / {
 	i2c51 = &i2c10mux0ch0;
 };
 
+&fmc {
+	flash at 0 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+	flash at 1 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	flash at 0 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+};
+
 // MB - PDB
 &i2c8 {
 	i2c-mux at 72 {

-- 
2.34.1