[RFC PATCH v5 v5 2/8] dt-bindings: power: rockchip: allow resets in a power domain node

[Jiaxing Hu]

Some domains do not come up in a usable state on their own and need
their resets cycled once power is on. The RK3576 NPU domains are one
case: without it the first access after power-on takes an async SError.

pd-node has no resets property and every nesting level is
unevaluatedProperties: false, so describing that in DT is rejected
today. Add it alongside clocks.

Signed-off-by: Jiaxing Hu <gahing at gahingwoo.com>
---
 .../bindings/power/rockchip,power-controller.yaml         | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
index b41db576f..f23c1a118 100644
--- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -136,6 +136,14 @@ $defs:
           A number of phandles to clocks that need to be enabled
           while power domain switches state.
 
+      resets:
+        minItems: 1
+        maxItems: 30
+        description: |
+          A number of phandles to resets that need to be cycled once the power
+          domain has been switched on, for domains whose logic does not come up
+          in a usable state by itself.
+
       domain-supply:
         description: domain regulator supply.
 
-- 
2.43.0