[PATCH net-next v2 5/8] dt-bindings: net: x-powers: add AC300 EPHY control

[Rob Herring (Arm)]

On Tue, 04 Aug 2026 20:27:03 -0600, James Hilliard wrote:
> The AC300 exposes its Fast Ethernet PHY control registers through a
> separate non-PHY Clause 22 address. The manual defines that address as
> the link PHY address plus 16, giving control addresses 16 through 23 and
> link addresses 0 through 7.
> 
> Describe the control endpoint, its required VCC1 supply, its 24, 25 or
> 27 MHz input clock and its SoC SID calibration cell. The actual PHY
> remains a separate ethernet-phy node and supplies the MAC-selected
> interface mode at runtime.
> 
> Signed-off-by: James Hilliard <james.hilliard1 at gmail.com>
> ---
>  .../bindings/net/x-powers,ac300-ephy-ctl.yaml      | 70 ++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.example.dtb: display0: fsl,pcr: b'\xf0\xc8\x80\x80' is not of type 'object', 'integer', 'array', 'boolean', 'null'
	from schema $id: http://devicetree.org/schemas/dt-core.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260804-submit-acx00-of-dynamic-v1-v2-5-3eef49ff1d8c@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.