[PATCH 1/7] pmdomain: arm: Fix -EINVAL from scmi_pd_set_perf_state() on state 0

[Praveen Talari]

Currently, scmi_pd_set_perf_state() treats a performance state of 0 as
invalid and returns -EINVAL. As a result, devices attached to SCMI
performance domains can report failures when relinquishing their
performance vote.

The OPP framework use performance state 0 to indicate that no performance
vote is required. For example, dev_pm_opp_set_rate(dev, 0) is commonly
used (by firmware or linux)  when a device is runtime suspended.

A zero performance state does not require any SCMI performance request
to be sent. Treat it as a no-op and return success instead of reporting
an error.

Signed-off-by: Praveen Talari <praveen.talari at oss.qualcomm.com>
---
 drivers/pmdomain/arm/scmi_perf_domain.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pmdomain/arm/scmi_perf_domain.c b/drivers/pmdomain/arm/scmi_perf_domain.c
index 3693423459c9..e390f902a444 100644
--- a/drivers/pmdomain/arm/scmi_perf_domain.c
+++ b/drivers/pmdomain/arm/scmi_perf_domain.c
@@ -33,7 +33,7 @@ scmi_pd_set_perf_state(struct generic_pm_domain *genpd, unsigned int state)
 		return 0;
 
 	if (!state)
-		return -EINVAL;
+		return 0;
 
 	ret = pd->perf_ops->level_set(pd->ph, pd->domain_id, state, false);
 	if (ret)

-- 
2.34.1