[PATCH v2 5/8] arm64: dts: google: Move 'status' to the end to match coding style
Peter Griffin
peter.griffin at linaro.org
Tue Aug 4 05:10:58 PDT 2026
On Sat, 1 Aug 2026 at 16:07, Krzysztof Kozlowski
<krzysztof.kozlowski at oss.qualcomm.com> wrote:
>
> 'status' property is special, thus DTS coding style expects it to be
> always the last property preceded with a blank line, as reported by
> dt-check-style:
>
> [required-blank-lines] "status" must be preceded by a blank line
> [property-order] property 'vcc-supply' out of canonical order (should sort before 'status')
>
> Reviewed-by: André Draszik <andre.draszik at linaro.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
> ---
Reviewed-by: Peter Griffin <peter.griffin at linaro.org>
> arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 2 +
> .../boot/dts/exynos/google/gs101-pixel-common.dtsi | 12 +++-
> arch/arm64/boot/dts/exynos/google/gs101-raven.dts | 2 +
> arch/arm64/boot/dts/exynos/google/gs101.dtsi | 70 ++++++++++++++++++++++
> 4 files changed, 85 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> index 36721adcaa23..c5a3958c2320 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> @@ -39,6 +39,7 @@ ldo31m {
>
> &cont_splash_mem {
> reg = <0x0 0xfac00000 (1080 * 2400 * 4)>;
> +
> status = "okay";
> };
>
> @@ -47,5 +48,6 @@ &framebuffer0 {
> height = <2400>;
> stride = <(1080 * 4)>;
> format = "a8r8g8b8";
> +
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
> index 5227cd4e314b..a12f2b88d72d 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
> @@ -32,6 +32,7 @@ framebuffer0: framebuffer-0 {
> vci-supply = <&s2mpg10_ldo22m>;
> vddi-supply = <&s2mpg11_bucka>;
> /* format properties to be added by actual board */
> +
> status = "disabled";
> };
> };
> @@ -98,6 +99,7 @@ cont_splash_mem: splash at fac00000 {
> /* size to be updated by actual board */
> reg = <0x0 0xfac00000 0x0>;
> no-map;
> +
> status = "disabled";
> };
> };
> @@ -856,8 +858,9 @@ &serial_0 {
> };
>
> &ufs_0 {
> - status = "okay";
> vcc-supply = <&ufs_0_fixed_vcc_reg>;
> +
> + status = "okay";
> };
>
> &ufs_0_phy {
> @@ -867,6 +870,7 @@ &ufs_0_phy {
> &usbdrd31 {
> vdd10-supply = <®_placeholder>;
> vdd33-supply = <®_placeholder>;
> +
> status = "okay";
> };
>
> @@ -875,6 +879,7 @@ &usbdrd31_dwc3 {
> usb-role-switch;
> role-switch-default-mode = "peripheral";
> maximum-speed = "super-speed-plus";
> +
> status = "okay";
>
> port {
> @@ -893,6 +898,7 @@ &usbdrd31_phy {
> vdd33-usb20-supply = <®_placeholder>;
> vdda-usbdp-supply = <®_placeholder>;
> vddh-usbdp-supply = <®_placeholder>;
> +
> status = "okay";
>
> port {
> @@ -904,20 +910,24 @@ usbdrd31_phy_orien_switch: endpoint {
>
> &usi_uart {
> samsung,clkreq-on; /* needed for UART mode */
> +
> status = "okay";
> };
>
> &usi8 {
> samsung,mode = <USI_MODE_I2C>;
> +
> status = "okay";
> };
>
> &usi12 {
> samsung,mode = <USI_MODE_I2C>;
> +
> status = "okay";
> };
>
> &watchdog_cl0 {
> timeout-sec = <30>;
> +
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-raven.dts b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
> index a422542715f2..7c4273796a22 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
> @@ -35,6 +35,7 @@ ldo14s {
>
> &cont_splash_mem {
> reg = <0x0 0xfac00000 (1440 * 3120 * 4)>;
> +
> status = "okay";
> };
>
> @@ -43,5 +44,6 @@ &framebuffer0 {
> height = <3120>;
> stride = <(1440 * 4)>;
> format = "a8r8g8b8";
> +
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> index 86933f22647b..edc38f2d1183 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -624,6 +624,7 @@ watchdog_cl0: watchdog at 10060000 {
> interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
> samsung,syscon-phandle = <&pmu_system_controller>;
> samsung,cluster-index = <0>;
> +
> status = "disabled";
> };
>
> @@ -636,6 +637,7 @@ watchdog_cl1: watchdog at 10070000 {
> interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
> samsung,syscon-phandle = <&pmu_system_controller>;
> samsung,cluster-index = <1>;
> +
> status = "disabled";
> };
>
> @@ -707,6 +709,7 @@ usi1: usi at 109000c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x1000>;
> +
> status = "disabled";
>
> hsi2c_1: i2c at 10900000 {
> @@ -721,6 +724,7 @@ hsi2c_1: i2c at 10900000 {
> interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c1_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -734,6 +738,7 @@ serial_1: serial at 10900000 {
> pinctrl-0 = <&uart1_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -748,6 +753,7 @@ spi_1: spi at 10900000 {
> interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi1_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -762,6 +768,7 @@ usi2: usi at 109100c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x1004>;
> +
> status = "disabled";
>
> hsi2c_2: i2c at 10910000 {
> @@ -776,6 +783,7 @@ hsi2c_2: i2c at 10910000 {
> interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c2_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -789,6 +797,7 @@ serial_2: serial at 10910000 {
> pinctrl-0 = <&uart2_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -803,6 +812,7 @@ spi_2: spi at 10910000 {
> interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi2_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -817,6 +827,7 @@ usi3: usi at 109200c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x1008>;
> +
> status = "disabled";
>
> hsi2c_3: i2c at 10920000 {
> @@ -831,6 +842,7 @@ hsi2c_3: i2c at 10920000 {
> interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c3_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -844,6 +856,7 @@ serial_3: serial at 10920000 {
> pinctrl-0 = <&uart3_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -858,6 +871,7 @@ spi_3: spi at 10920000 {
> interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi3_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -872,6 +886,7 @@ usi4: usi at 109300c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x100c>;
> +
> status = "disabled";
>
> hsi2c_4: i2c at 10930000 {
> @@ -886,6 +901,7 @@ hsi2c_4: i2c at 10930000 {
> interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c4_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -899,6 +915,7 @@ serial_4: serial at 10930000 {
> pinctrl-0 = <&uart4_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -913,6 +930,7 @@ spi_4: spi at 10930000 {
> interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi4_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -927,6 +945,7 @@ usi5: usi at 109400c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x1010>;
> +
> status = "disabled";
>
> hsi2c_5: i2c at 10940000 {
> @@ -941,6 +960,7 @@ hsi2c_5: i2c at 10940000 {
> interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c5_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -954,6 +974,7 @@ serial_5: serial at 10940000 {
> pinctrl-0 = <&uart5_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -968,6 +989,7 @@ spi_5: spi at 10940000 {
> interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi5_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -982,6 +1004,7 @@ usi6: usi at 109500c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x1014>;
> +
> status = "disabled";
>
> hsi2c_6: i2c at 10950000 {
> @@ -996,6 +1019,7 @@ hsi2c_6: i2c at 10950000 {
> interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c6_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1009,6 +1033,7 @@ serial_6: serial at 10950000 {
> pinctrl-0 = <&uart6_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1023,6 +1048,7 @@ spi_6: spi at 10950000 {
> interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi6_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1037,6 +1063,7 @@ usi7: usi at 109600c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x1018>;
> +
> status = "disabled";
>
> hsi2c_7: i2c at 10960000 {
> @@ -1051,6 +1078,7 @@ hsi2c_7: i2c at 10960000 {
> interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c7_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1064,6 +1092,7 @@ serial_7: serial at 10960000 {
> pinctrl-0 = <&uart7_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1078,6 +1107,7 @@ spi_7: spi at 10960000 {
> interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi7_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1092,6 +1122,7 @@ usi8: usi at 109700c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x101c>;
> +
> status = "disabled";
>
> hsi2c_8: i2c at 10970000 {
> @@ -1106,6 +1137,7 @@ hsi2c_8: i2c at 10970000 {
> interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c8_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1119,6 +1151,7 @@ serial_8: serial at 10970000 {
> pinctrl-0 = <&uart8_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1133,6 +1166,7 @@ spi_8: spi at 10970000 {
> interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi8_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1148,6 +1182,7 @@ usi_uart: usi at 10a000c0 {
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x1020>;
> samsung,mode = <USI_MODE_UART>;
> +
> status = "disabled";
>
> serial_0: serial at 10a00000 {
> @@ -1160,6 +1195,7 @@ serial_0: serial at 10a00000 {
> pinctrl-0 = <&uart0_bus>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <256>;
> +
> status = "disabled";
> };
> };
> @@ -1174,6 +1210,7 @@ usi14: usi at 10a200c0 {
> <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric0 0x1028>;
> +
> status = "disabled";
>
> hsi2c_14: i2c at 10a20000 {
> @@ -1188,6 +1225,7 @@ hsi2c_14: i2c at 10a20000 {
> interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c14_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1201,6 +1239,7 @@ serial_14: serial at 10a20000 {
> pinctrl-0 = <&uart14_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1215,6 +1254,7 @@ spi_14: spi at 10a20000 {
> interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi14_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1254,6 +1294,7 @@ usi0: usi at 10d100c0 {
> <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric1 0x1000>;
> +
> status = "disabled";
>
> hsi2c_0: i2c at 10d10000 {
> @@ -1268,6 +1309,7 @@ hsi2c_0: i2c at 10d10000 {
> interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c0_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1281,6 +1323,7 @@ serial_usi0: serial at 10d10000 {
> pinctrl-0 = <&uart0_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1295,6 +1338,7 @@ spi_0: spi at 10d10000 {
> interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi0_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1309,6 +1353,7 @@ usi9: usi at 10d200c0 {
> <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric1 0x1004>;
> +
> status = "disabled";
>
> hsi2c_9: i2c at 10d20000 {
> @@ -1323,6 +1368,7 @@ hsi2c_9: i2c at 10d20000 {
> interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c9_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1336,6 +1382,7 @@ serial_9: serial at 10d20000 {
> pinctrl-0 = <&uart9_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1350,6 +1397,7 @@ spi_9: spi at 10d20000 {
> interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi9_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1364,6 +1412,7 @@ usi10: usi at 10d300c0 {
> <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric1 0x1008>;
> +
> status = "disabled";
>
> hsi2c_10: i2c at 10d30000 {
> @@ -1378,6 +1427,7 @@ hsi2c_10: i2c at 10d30000 {
> interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c10_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1391,6 +1441,7 @@ serial_10: serial at 10d30000 {
> pinctrl-0 = <&uart10_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1405,6 +1456,7 @@ spi_10: spi at 10d30000 {
> interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi10_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1419,6 +1471,7 @@ usi11: usi at 10d400c0 {
> <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric1 0x100c>;
> +
> status = "disabled";
>
> hsi2c_11: i2c at 10d40000 {
> @@ -1433,6 +1486,7 @@ hsi2c_11: i2c at 10d40000 {
> interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c11_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1446,6 +1500,7 @@ serial_11: serial at 10d40000 {
> pinctrl-0 = <&uart11_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1460,6 +1515,7 @@ spi_11: spi at 10d40000 {
> interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi11_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1474,6 +1530,7 @@ usi12: usi at 10d500c0 {
> <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric1 0x1010>;
> +
> status = "disabled";
>
> hsi2c_12: i2c at 10d50000 {
> @@ -1488,6 +1545,7 @@ hsi2c_12: i2c at 10d50000 {
> interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c12_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1501,6 +1559,7 @@ serial_12: serial at 10d50000 {
> pinctrl-0 = <&uart12_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1515,6 +1574,7 @@ spi_12: spi at 10d50000 {
> interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi12_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1529,6 +1589,7 @@ usi13: usi at 10d600c0 {
> <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
> clock-names = "pclk", "ipclk";
> samsung,sysreg = <&sysreg_peric1 0x1014>;
> +
> status = "disabled";
>
> hsi2c_13: i2c at 10d60000 {
> @@ -1543,6 +1604,7 @@ hsi2c_13: i2c at 10d60000 {
> interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&hsi2c13_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
>
> @@ -1556,6 +1618,7 @@ serial_13: serial at 10d60000 {
> pinctrl-0 = <&uart13_bus_single>;
> pinctrl-names = "default";
> samsung,uart-fifosize = <64>;
> +
> status = "disabled";
> };
>
> @@ -1570,6 +1633,7 @@ spi_13: spi at 10d60000 {
> interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
> pinctrl-0 = <&spi13_bus>;
> pinctrl-names = "default";
> +
> status = "disabled";
> };
> };
> @@ -1609,6 +1673,7 @@ usbdrd31_phy: phy at 11100000 {
> clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
> #phy-cells = <1>;
> samsung,pmu-syscon = <&pmu_system_controller>;
> +
> status = "disabled";
> };
>
> @@ -1622,6 +1687,7 @@ usbdrd31: usb at 11110000 {
> clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
> #address-cells = <1>;
> #size-cells = <1>;
> +
> status = "disabled";
>
> usbdrd31_dwc3: usb at 0 {
> @@ -1635,6 +1701,7 @@ usbdrd31_dwc3: usb at 0 {
> snps,has-lpm-erratum;
> snps,dis_u2_susphy_quirk;
> snps,dis_u3_susphy_quirk;
> +
> status = "disabled";
> };
> };
> @@ -1698,6 +1765,7 @@ ufs_0: ufs at 14700000 {
> phys = <&ufs_0_phy>;
> phy-names = "ufs-phy";
> samsung,sysreg = <&sysreg_hsi2 0x710>;
> +
> status = "disabled";
> };
>
> @@ -1709,6 +1777,7 @@ ufs_0_phy: phy at 14704000 {
> #phy-cells = <0>;
> clocks = <&ext_24_5m>;
> clock-names = "ref_clk";
> +
> status = "disabled";
> };
>
> @@ -1812,6 +1881,7 @@ pinctrl_gsacore: pinctrl at 17a80000 {
> /* TODO: update once support for this CMU exists */
> clocks = <0>;
> clock-names = "pclk";
> +
> status = "disabled";
> };
>
>
> --
> 2.53.0
>
More information about the linux-arm-kernel
mailing list