[PATCH 0/8] MMC pinmux configuration fixes

[Mendez, Judith]

Hi Vignesh,

On 7/31/2026 5:56 AM, Vignesh Raghavendra wrote:
> Hi Judith
> 
> On 30/07/26 01:29, Judith Mendez wrote:
>> This series fixes MMC pin input/output and pullup/pulldown settings
>> across AM62x, AM62AX, AM62LX and AM64x boards.
>>
>> All patches have been tested except patch 5/8, so tested-bys
>> are apreciated.
>>
>> Judith Mendez (8):
>>    arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address
>>    arm64: dts: ti: k3-am62a: Set MMC clock pins as OUTPUT
>>    arm64: dts: ti: k3-am62: Set MMC clock pins as OUTPUT
>>    arm64: dts: ti: k3-am62l-evm: Remove unnecessary internal pullups for
>>      MMC0
>>    arm64: dts: ti: k3-am64: Enable IO expander interrupt
>>    arm64: dts: ti: k3-am64: Let MMC1 clock loopback use hardware default
>>    arm64: dts: ti: k3-am64-sk: Disable MMC1 internal pulls
>>    arm64: dts: ti: k3-am642-evm: Remove unnecessary internal pullups for
>>      MMC1
>>
> 
> Apart from 5/8, these patches seems like bug fixes. Please repost them
> with appropriate Fixes tag. Its better to separate out 5/8 as standalone
> patch.

Since they were not functional fixes and were more of documentation
fixes, I did not include the fixes tag, but sure, will go ahead and
re-spin with fixes tag.

~ Judith


> 
>>   arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts      |  2 +-
>>   .../boot/dts/ti/k3-am62-pocketbeagle2.dts     |  2 +-
>>   .../arm64/boot/dts/ti/k3-am625-beagleplay.dts |  6 ++--
>>   .../arm64/boot/dts/ti/k3-am625-sk-common.dtsi |  2 +-
>>   arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       |  5 ++--
>>   arch/arm64/boot/dts/ti/k3-am62l3-evm.dts      |  4 +--
>>   .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |  2 +-
>>   arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 19 +++++++++---
>>   arch/arm64/boot/dts/ti/k3-am642-sk.dts        | 29 +++++++++++++------
>>   9 files changed, 46 insertions(+), 25 deletions(-)
>>
>