[PATCH] ARM: dts: ixp4xx: use phandle-based GPIOs in mi424wr

[Mohamed Ayman]

Convert remaining legacy integer GPIO specifiers to phandle-based
descriptors in intel-ixp42x-actiontec-mi424wr.dtsi.

All other GPIOs in this file already use &gpio0/&gpio1. These are the
last remaining legacy users in the IXP4xx DTS files.

Signed-off-by: Mohamed Ayman <mohamedaymanworkspace at gmail.com>
---
 .../boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi  | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
index 9b54e3c01a34..3043ae7232dd 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -195,19 +195,19 @@ gpio1: gpio at 1,0 {
 
 				pci-reset-hog {
 					gpio-hog;
-					gpios = <7 GPIO_ACTIVE_HIGH>;
+					gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 					output-high;
 					line-name = "PCI reset";
 				};
 				pstn-relay-hog-1 {
 					gpio-hog;
-					gpios = <11 GPIO_ACTIVE_HIGH>;
+					gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
 					output-low;
 					line-name = "PSTN relay control 1";
 				};
 				pstn-relay-hog-2 {
 					gpio-hog;
-					gpios = <12 GPIO_ACTIVE_HIGH>;
+					gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 					output-low;
 					line-name = "PSTN relay control 2";
 				};
-- 
2.34.1