[PATCH 04/43] irqchip/gic-v5: Provide IRS config frame attrs to KVM

[Marc Zyngier]

On Mon, 27 Apr 2026 17:07:24 +0100,
Sascha Bischoff <Sascha.Bischoff at arm.com> wrote:
> 
> KVM needs to interact with the host IRS in order to, for example, make
> VMs or VPEs valid. There are two potential approaches here. Either the
> host irqchip driver can provide an interface, or KVM can interact
> directly with the host IRS. The latter of these two is chosen as the
> set of MMIO registers that KVM needs to interact with is orthogonal to
> the set used by the host irqchip driver (with the exception of some of
> the read-only IRS_IDRx registers).
> 
> Pass KVM a pointer to an IRS config frame - the config frame belonging
> to ANY IRS is fine as long as one IRS's config frame is used
> consistently - in struct gic_kvm_info. Additionally, include a flag
> telling KVM whether the IRS is coherent or non-coherent in order to
> make sure that KVM can do the correct cache state management, if
> required.
> 
> Signed-off-by: Sascha Bischoff <sascha.bischoff at arm.com>
> ---
>  drivers/irqchip/irq-gic-v5-irs.c      | 26 ++++++++++++++++++++++++++
>  drivers/irqchip/irq-gic-v5.c          |  3 +++
>  include/linux/irqchip/arm-gic-v5.h    |  2 ++
>  include/linux/irqchip/arm-vgic-info.h |  5 +++++
>  4 files changed, 36 insertions(+)
> 
> diff --git a/drivers/irqchip/irq-gic-v5-irs.c b/drivers/irqchip/irq-gic-v5-irs.c
> index f3fce0b1e25d9..5dfa043cf9e34 100644
> --- a/drivers/irqchip/irq-gic-v5-irs.c
> +++ b/drivers/irqchip/irq-gic-v5-irs.c
> @@ -50,6 +50,32 @@ static void irs_writeq_relaxed(struct gicv5_irs_chip_data *irs_data,
>  	writeq_relaxed(val, irs_data->irs_base + reg_offset);
>  }
>  
> +void __iomem *gicv5_irs_get_config_frame_base(void)
> +{
> +	struct gicv5_irs_chip_data *irs_data = per_cpu(per_cpu_irs_data,
> +						       smp_processor_id());
> +
> +	if (!irs_data)
> +		return NULL;
> +
> +	return irs_data->irs_base;
> +}
> +
> +bool gicv5_irs_is_non_coherent(void)
> +{
> +	struct gicv5_irs_chip_data *irs_data = per_cpu(per_cpu_irs_data,
> +						       smp_processor_id());
> +
> +	if (!irs_data) {
> +		pr_err("Failed to look up IRS for CPU %d\n",
> +		       smp_processor_id());
> +		return false;
> +	}
> +
> +	return !!(irs_data->flags & IRS_FLAGS_NON_COHERENT);
> +}
> +

Frankly, we don't need these micro-helpers. Just add *one* that
returns a pointer to the IRS data for CPU0, and do the information
cherry-picking in the caller.

> +
>  /*
>   * The polling wait (in gicv5_wait_for_op_s_atomic()) on a GIC register
>   * provides the memory barriers (through MMIO accessors)
> diff --git a/drivers/irqchip/irq-gic-v5.c b/drivers/irqchip/irq-gic-v5.c
> index 58e457d4c1476..3329019722360 100644
> --- a/drivers/irqchip/irq-gic-v5.c
> +++ b/drivers/irqchip/irq-gic-v5.c
> @@ -1134,6 +1134,9 @@ static void __init gic_of_setup_kvm_info(struct device_node *node)
>  
>  	gic_v5_kvm_info.type = GIC_V5;
>  
> +	gic_v5_kvm_info.gicv5_irs.base = gicv5_irs_get_config_frame_base();
> +	gic_v5_kvm_info.gicv5_irs.non_coherent = gicv5_irs_is_non_coherent();
> +
>  	/* GIC Virtual CPU interface maintenance interrupt */
>  	gic_v5_kvm_info.no_maint_irq_mask = false;
>  	gic_v5_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);

While you're at it, you may want to fix the check on the maintenance
interrupt, which gives up registering with KVM if no MI is found, even
in the absence of FEAT_GCIE_LEGACY.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.