[PATCH v2 0/2] Add NXP FRDM-IMX95-PRO board support

[Joseph Guo]

This patchset add Devicetree support for NXP FRDM-IMX95-PRO
development board based on i.MX95 19x19 SoC.

Signed-off-by: Joseph Guo <qijian.guo at nxp.com>
---
Changes in v2:
- Run dt-format to reformat the node order
- Change compatible of mqs to audio-graph-card2
- Add imx95-19x19-frdm-pro in Makefile
- Link to v1: https://lore.kernel.org/r/20260318-imx95_frdm_pro-v1-0-8c00e59f0b1b@nxp.com

---
Joseph Guo (2):
      dt-bindings: arm: fsl: Add i.MX95 19x19 FRDM PRO board
      arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts

 Documentation/devicetree/bindings/arm/fsl.yaml     |    1 +
 arch/arm64/boot/dts/freescale/Makefile             |    1 +
 .../boot/dts/freescale/imx95-19x19-frdm-pro.dts    | 1049 ++++++++++++++++++++
 3 files changed, 1051 insertions(+)
---
base-commit: 7109a2155340cc7b21f27e832ece6df03592f2e8
change-id: 20260311-imx95_frdm_pro-7a8d03b50982

Best regards,
-- 
Joseph Guo <qijian.guo at nxp.com>