[PATCH v21 10/13] arm64: dts: qcom: Add psci reboot-modes for kodiak boards

Shivendra Pratap shivendra.pratap at oss.qualcomm.com
Mon Apr 27 10:34:50 PDT 2026


Add PSCI SYSTEM_RESET2 reboot-modes for qcm6490-idp and qcs6490-rb3gen2
for use by the psci-reboot-mode driver.
The following modes are defined:
- bootloader: reboot into fastboot mode for fastboot flashing.
- edl: reboot into emergency download mode for image loading via
  the Firehose protocol.

Support for these modes is firmware dependent and not available across
all kodiak based boards.

Signed-off-by: Shivendra Pratap <shivendra.pratap at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kodiak.dtsi         | 2 +-
 arch/arm64/boot/dts/qcom/qcm6490-idp.dts     | 7 +++++++
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 7 +++++++
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index 988ca5f7c8a0ec5196c88881f529236c321ad617..72bcc732ab7b64288e1848edb8a55e2c7fe34f98 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -863,7 +863,7 @@ pmu-a78 {
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
-	psci {
+	psci: psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index bdc02260f902bd37242ba96b90a858ff091e0c80..b7a0b53476395c25f264f2808176588f5943c4c7 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -786,6 +786,13 @@ &qup_uart7_tx {
 	bias-disable;
 };
 
+&psci {
+	reboot-mode {
+		mode-bootloader = <0x80010001 0x2>;
+		mode-edl = <0x80000000 0x1>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index e393ccf1884afde7816739053d41ca789acfca91..ec614003bd83664b5485940edd366c9ddbd57340 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -1088,6 +1088,13 @@ &pon_resin {
 	status = "okay";
 };
 
+&psci {
+	reboot-mode {
+		mode-bootloader = <0x80010001 0x2>;
+		mode-edl = <0x80000000 0x1>;
+	};
+};
+
 &qup_uart7_cts {
 	/*
 	 * Configure a bias-bus-hold on CTS to lower power

-- 
2.34.1




More information about the linux-arm-kernel mailing list