[PATCH v2 2/4] ARM: pxa: spitz: attach software nodes to their target GPIO controllers

[Bartosz Golaszewski]

Software nodes describing the GPIO controllers for the spitz platform
are currently "dangling" - they're not actually attached to the relevant
controllers and don't allow real fwnode lookup. Attach them either by
directly assigning them to the struct device or by using the i2c board
info struct.

Reviewed-by: Linus Walleij <linusw at kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>
---
 arch/arm/mach-pxa/spitz.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3284b9f62be970555042a7292993e45d56fde47e..5091b601c4e1bf25cfee07429881894929853dfe 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -204,11 +204,15 @@ static struct platform_device spitz_scoop_2_device = {
 
 static void __init spitz_scoop_init(void)
 {
+	spitz_scoop_1_device.dev.fwnode = software_node_fwnode(&spitz_scoop_1_gpiochip_node);
 	platform_device_register(&spitz_scoop_1_device);
 
 	/* Akita doesn't have the second SCOOP chip */
-	if (!machine_is_akita())
+	if (!machine_is_akita()) {
+		spitz_scoop_2_device.dev.fwnode = software_node_fwnode(
+							&spitz_scoop_2_gpiochip_node);
 		platform_device_register(&spitz_scoop_2_device);
+	}
 }
 
 /* Power control is shared with between one of the CF slots and SD */
@@ -988,6 +992,7 @@ static struct i2c_board_info spitz_i2c_devs[] = {
 		.type		= "max7310",
 		.addr		= 0x18,
 		.platform_data	= &akita_pca953x_pdata,
+		.swnode		= &akita_max7310_gpiochip_node,
 	},
 };
 

-- 
2.47.3