[PATCH v3 3/3] arm64: dts: broadcom: rpi-5: Add RP1 PWM node

[Andrea della Porta]

From: Stanimir Varbanov <svarbanov at suse.de>

The RP1 chipset used on the Raspberry Pi 5 features an integrated
PWM controller to drive the cooling fan.

Add the corresponding DT node for this PWM controller.

Signed-off-by: Stanimir Varbanov <svarbanov at suse.de>
Co-developed-by: Andrea della Porta <andrea.porta at suse.com>
Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
---
 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 12 ++++++++++++
 arch/arm64/boot/dts/broadcom/rp1-common.dtsi     | 10 ++++++++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 2856082814462..a4e5ba23bf536 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -64,12 +64,24 @@ phy1: ethernet-phy at 1 {
 };
 
 &rp1_gpio {
+	fan_pwm_default_state: fan-pwm-default-state {
+		function = "pwm1";
+		pins = "gpio45";
+		bias-pull-down;
+	};
+
 	usb_vbus_default_state: usb-vbus-default-state {
 		function = "vbus1";
 		groups = "vbus1";
 	};
 };
 
+&rp1_pwm {
+	pinctrl-0 = <&fan_pwm_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &rp1_usb0 {
 	pinctrl-0 = <&usb_vbus_default_state>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
index 5a815c3797945..d0f4d6be75500 100644
--- a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -26,6 +26,16 @@ rp1_clocks: clocks at 40018000 {
 				       <200000000>;  // RP1_CLK_SYS
 	};
 
+	rp1_pwm: pwm at 4009c000 {
+		compatible = "raspberrypi,rp1-pwm";
+		reg = <0x00 0x4009c000  0x0 0x100>;
+		clocks = <&rp1_clocks RP1_CLK_PWM1>;
+		assigned-clocks = <&rp1_clocks RP1_CLK_PWM1>;
+		assigned-clock-rates = <50000000>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
 	rp1_gpio: pinctrl at 400d0000 {
 		compatible = "raspberrypi,rp1-gpio";
 		reg = <0x00 0x400d0000  0x0 0xc000>,
-- 
2.35.3