[PATCH] arm64: dts: ti: k3-j722s: use ti,j7200-padconf compatible

[Richard Genoud (TI)]

From: Abhash Kumar Jha <a-kumar2 at ti.com>

The pinctrl contexts for j722s should be saved and restored during
suspend-to-ram, just like it is done for j7200 and j784s4 SoCs.

Use ti,j7200-padconf compatible to save and restore pinctrl contexts during
suspend-to-ram.

Signed-off-by: Abhash Kumar Jha <a-kumar2 at ti.com>
Signed-off-by: Richard Genoud (TI) <richard.genoud at bootlin.com>
---
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index e66330c71593..757eb6abcd72 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -242,6 +242,7 @@ &phy_gmii_sel {
 };
 
 &main_pmx0 {
+	compatible = "ti,j7200-padconf", "pinctrl-single";
 
 	main_mcan0_pins_default: main-mcan0-default-pins {
 		pinctrl-single,pins = <
@@ -418,6 +419,7 @@ &main_uart5 {
 };
 
 &mcu_pmx0 {
+	compatible = "ti,j7200-padconf", "pinctrl-single";
 
 	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
 		pinctrl-single,pins = <
-- 
2.47.3