[PATCH 1/2] arm64: dts: imx8mq: Correct MIPI CSI clocks

[Robby Cai]

CSI capture may intermittently fail due to mismatched clock rates. The
previous configuration violated the timing requirement stated in the
i.MX8MQ Reference Manual:

  "The frequency of clk must be exactly equal to or greater than the RX
   byte clock coming from the RX DPHY."

Update the clock configuration to ensure that the CSI core clock rate is
equal to or greater than the incoming DPHY byte clock. The updated clock
ratios are consistent with those used in NXP's downstream BSP.

Fixes: bcadd5f66c2a ("arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions")
Cc: stable at vger.kernel.org
Signed-off-by: Robby Cai <robby.cai at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 6a25e219832c..165716d08e64 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1377,7 +1377,7 @@ mipi_csi1: csi at 30a70000 {
 				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
 				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
 				    <&clk IMX8MQ_CLK_CSI1_ESC>;
-				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-rates = <133000000>, <100000000>, <66000000>;
 				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
 					<&clk IMX8MQ_SYS2_PLL_1000M>,
 					<&clk IMX8MQ_SYS1_PLL_800M>;
@@ -1429,7 +1429,7 @@ mipi_csi2: csi at 30b60000 {
 				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
 				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
 				    <&clk IMX8MQ_CLK_CSI2_ESC>;
-				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-rates = <133000000>, <100000000>, <66000000>;
 				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
 					<&clk IMX8MQ_SYS2_PLL_1000M>,
 					<&clk IMX8MQ_SYS1_PLL_800M>;
-- 
2.37.1