[PATCH] arm64: dts: st: Fix SAI addresses on stm32mp251

[Olivier MOYSAN]

Hi Marek,

On 4/11/26 15:02, Marek Vasut wrote:
> The second field of SAI register addresses should be within 0x3f0 bytes
> from the start of the SAI register addresses, the second field describes
> the ID registers which are at that addrses. Currently, the second field
> does not match RM, fix it.
> 
> Fixes: bf26d75a95f1 ("arm64: dts: st: add sai support on stm32mp251")
> Signed-off-by: Marek Vasut <marex at nabladev.com>
> ---
> Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
> Cc: Conor Dooley <conor+dt at kernel.org>
> Cc: Krzysztof Kozlowski <krzk+dt at kernel.org>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Olivier Moysan <olivier.moysan at foss.st.com>
> Cc: Rob Herring <robh at kernel.org>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> ---
>   arch/arm64/boot/dts/st/stm32mp251.dtsi | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
> index 673fbc5632e69..9c63fdb5a885a 100644
> --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
> +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
> @@ -1202,7 +1202,7 @@ spi5: spi at 40280000 {
>   
>   			sai1: sai at 40290000 {
>   				compatible = "st,stm32mp25-sai";
> -				reg = <0x40290000 0x4>, <0x4029a3f0 0x10>;
> +				reg = <0x40290000 0x4>, <0x402903f0 0x10>;
>   				ranges = <0 0x40290000 0x400>;
>   				#address-cells = <1>;
>   				#size-cells = <1>;
> @@ -1236,7 +1236,7 @@ sai1b: audio-controller at 40290024 {
>   
>   			sai2: sai at 402a0000 {
>   				compatible = "st,stm32mp25-sai";
> -				reg = <0x402a0000 0x4>, <0x402aa3f0 0x10>;
> +				reg = <0x402a0000 0x4>, <0x402a03f0 0x10>;
>   				ranges = <0 0x402a0000 0x400>;
>   				#address-cells = <1>;
>   				#size-cells = <1>;
> @@ -1270,7 +1270,7 @@ sai2b: audio-controller at 402a0024 {
>   
>   			sai3: sai at 402b0000 {
>   				compatible = "st,stm32mp25-sai";
> -				reg = <0x402b0000 0x4>, <0x402ba3f0 0x10>;
> +				reg = <0x402b0000 0x4>, <0x402b03f0 0x10>;
>   				ranges = <0 0x402b0000 0x400>;
>   				#address-cells = <1>;
>   				#size-cells = <1>;
> @@ -1362,7 +1362,7 @@ usart1: serial at 40330000 {
>   
>   			sai4: sai at 40340000 {
>   				compatible = "st,stm32mp25-sai";
> -				reg = <0x40340000 0x4>, <0x4034a3f0 0x10>;
> +				reg = <0x40340000 0x4>, <0x403403f0 0x10>;
>   				ranges = <0 0x40340000 0x400>;
>   				#address-cells = <1>;
>   				#size-cells = <1>;

Reviewed-by: Olivier Moysan <olivier.moysan at foss.st.com>

Thanks for your patch
BRs
Olivier