[PATCH net-next 5/6] net: stmmac: move PHY handling out of __stmmac_open()/release()

[Russell King (Oracle)]

On Wed, Apr 15, 2026 at 08:08:40AM +0200, Alexander Stein wrote:
> Hi,
> 
> Am Dienstag, 23. September 2025, 13:26:19 CEST schrieb Russell King (Oracle):
> > Move the PHY attachment/detachment from the network driver out of
> > __stmmac_open() and __stmmac_release() into stmmac_open() and
> > stmmac_release() where these actions will only happen when the
> > interface is administratively brought up or down. It does not make
> > sense to detach and re-attach the PHY during a change of MTU.
> 
> Sorry for coming up now. But I recently noticed this commit breaks changing
> the MTU on i.MX8MP. Once I simply change the MTU I run into some DMA error:
> $ ip link set dev end1 mtu 1400
> imx-dwmac 30bf0000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0
> imx-dwmac 30bf0000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-1
> imx-dwmac 30bf0000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-2
> imx-dwmac 30bf0000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-3
> imx-dwmac 30bf0000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-4
> imx-dwmac 30bf0000.ethernet end1: Link is Down
> imx-dwmac 30bf0000.ethernet end1: Failed to reset the dma
> imx-dwmac 30bf0000.ethernet end1: stmmac_hw_setup: DMA engine initialization failed

This basically means that a clock is missing. Please provide more
information:

- what kernel version are you using?
- has EEE been negotiated?
- does the problem persist when EEE is disabled?
- which PHY is attached to stmmac?
- which PHY interface mode is being used to connect the PHY to stmmac?

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!