[PATCH 4/4] arm64: dts: marvell: mmp: pxa1908: Add reset cells

[Duje Mihanović]

From: Duje Mihanović <duje at dujemihanovic.xyz>

Add the newly implemented reset cells to the SoC dtsi.

Signed-off-by: Duje Mihanović <duje at dujemihanovic.xyz>
---
 arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
index 5778bfdb8567..05b56a759e27 100644
--- a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
@@ -132,6 +132,7 @@ twsi1: i2c at 10800 {
 				reg = <0x10800 0x64>;
 				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&apbc PXA1908_CLK_TWSI1>;
+				resets = <&apbc PXA1908_CLK_TWSI1>;
 				mrvl,i2c-fast-mode;
 				status = "disabled";
 			};
@@ -143,6 +144,7 @@ twsi0: i2c at 11000 {
 				reg = <0x11000 0x64>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&apbc PXA1908_CLK_TWSI0>;
+				resets = <&apbc PXA1908_CLK_TWSI0>;
 				mrvl,i2c-fast-mode;
 				status = "disabled";
 			};
@@ -154,6 +156,7 @@ twsi3: i2c at 13800 {
 				reg = <0x13800 0x64>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&apbc PXA1908_CLK_TWSI3>;
+				resets = <&apbc PXA1908_CLK_TWSI3>;
 				mrvl,i2c-fast-mode;
 				status = "disabled";
 			};
@@ -162,6 +165,7 @@ apbc: clock-controller at 15000 {
 				compatible = "marvell,pxa1908-apbc";
 				reg = <0x15000 0x1000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
 			};
 
 			uart0: serial at 17000 {
@@ -169,6 +173,7 @@ uart0: serial at 17000 {
 				reg = <0x17000 0x1000>;
 				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&apbc PXA1908_CLK_UART0>;
+				resets = <&apbc PXA1908_CLK_UART0>;
 				reg-shift = <2>;
 			};
 
@@ -177,6 +182,7 @@ uart1: serial at 18000 {
 				reg = <0x18000 0x1000>;
 				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&apbc PXA1908_CLK_UART1>;
+				resets = <&apbc PXA1908_CLK_UART1>;
 				reg-shift = <2>;
 			};
 
@@ -188,6 +194,7 @@ gpio: gpio at 19000 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				clocks = <&apbc PXA1908_CLK_GPIO>;
+				resets = <&apbc PXA1908_CLK_GPIO>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "gpio_mux";
 				interrupt-controller;
@@ -215,6 +222,7 @@ pwm0: pwm at 1a000 {
 				compatible = "marvell,pxa250-pwm";
 				reg = <0x1a000 0x10>;
 				clocks = <&apbc PXA1908_CLK_PWM0>;
+				resets = <&apbc PXA1908_CLK_PWM0>;
 				#pwm-cells = <1>;
 				status = "disabled";
 			};
@@ -223,6 +231,7 @@ pwm1: pwm at 1a400 {
 				compatible = "marvell,pxa250-pwm";
 				reg = <0x1a400 0x10>;
 				clocks = <&apbc PXA1908_CLK_PWM1>;
+				resets = <&apbc PXA1908_CLK_PWM1>;
 				#pwm-cells = <1>;
 				status = "disabled";
 			};
@@ -231,6 +240,7 @@ pwm2: pwm at 1a800 {
 				compatible = "marvell,pxa250-pwm";
 				reg = <0x1a800 0x10>;
 				clocks = <&apbc PXA1908_CLK_PWM2>;
+				resets = <&apbc PXA1908_CLK_PWM2>;
 				#pwm-cells = <1>;
 				status = "disabled";
 			};
@@ -239,6 +249,7 @@ pwm3: pwm at 1ac00 {
 				compatible = "marvell,pxa250-pwm";
 				reg = <0x1ac00 0x10>;
 				clocks = <&apbc PXA1908_CLK_PWM3>;
+				resets = <&apbc PXA1908_CLK_PWM3>;
 				#pwm-cells = <1>;
 				status = "disabled";
 			};
@@ -261,6 +272,7 @@ uart2: serial at 36000 {
 				reg = <0x36000 0x1000>;
 				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&apbcp PXA1908_CLK_UART2>;
+				resets = <&apbcp PXA1908_CLK_UART2>;
 				reg-shift = <2>;
 			};
 
@@ -271,6 +283,7 @@ twsi2: i2c at 37000 {
 				reg = <0x37000 0x64>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&apbcp PXA1908_CLK_TWSI2>;
+				resets = <&apbcp PXA1908_CLK_TWSI2>;
 				mrvl,i2c-fast-mode;
 				status = "disabled";
 			};
@@ -279,6 +292,7 @@ apbcp: clock-controller at 3b000 {
 				compatible = "marvell,pxa1908-apbcp";
 				reg = <0x3b000 0x1000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
 			};
 
 			mpmu: clock-controller at 50000 {

-- 
2.53.0