[PATCH 2/2] thermal/drivers/imxl:Fix runtime PM handling on early returns

[Felix Gu]

Use PM_RUNTIME_ACQUIRE() in imx_get_temp() and imx_set_trip_temp() so
runtime PM references are released correctly even when the functions
return early on errors.

Fixes: 4cf2ddf16e17 ("thermal/drivers/imx: Implement runtime PM support")
Signed-off-by: Felix Gu <ustc.gu at gmail.com>
---
 drivers/thermal/imx_thermal.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 68f9ce41a670..9d9ae7871068 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -260,8 +260,9 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 	u32 val;
 	int ret;
 
-	ret = pm_runtime_resume_and_get(data->dev);
-	if (ret < 0)
+	PM_RUNTIME_ACQUIRE(data->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
 		return ret;
 
 	regmap_read(map, soc_data->temp_data, &val);
@@ -302,8 +303,6 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 		enable_irq(data->irq);
 	}
 
-	pm_runtime_put(data->dev);
-
 	return 0;
 }
 
@@ -337,8 +336,9 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz,
 	struct imx_thermal_data *data = thermal_zone_device_priv(tz);
 	int ret;
 
-	ret = pm_runtime_resume_and_get(data->dev);
-	if (ret < 0)
+	PM_RUNTIME_ACQUIRE(data->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
 		return ret;
 
 	/* do not allow passive to be set higher than critical */
@@ -348,8 +348,6 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz,
 	imx_set_alarm_temp(data, temp);
 	trips[IMX_TRIP_PASSIVE].temperature = temp;
 
-	pm_runtime_put(data->dev);
-
 	return 0;
 }
 

-- 
2.43.0