[PATCH v1] arm64: dts: qcom: sm8750-mtp: Set sufficient voltage for panel nt37801

[Ayushi Makhija]

The NT37801 Sepc V1.0 chapter "5.7.1 Power On Sequence" states
VDDI=1.65V~1.95V, so set sufficient voltage for panel nt37801.

Fixes: 4fca6849864d ("drm/panel: Add Novatek NT37801 panel driver")
Signed-off-by: Ayushi Makhija <ayushi.makhija at oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 3837f6785320..6ba4e69bf377 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -462,7 +462,7 @@ vreg_l11b_1p0: ldo11 {
 
 		vreg_l12b_1p8: ldo12 {
 			regulator-name = "vreg_l12b_1p8";
-			regulator-min-microvolt = <1200000>;
+			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
-- 
2.34.1