[PATCH v1 6/7] arm64: dts: freescale: imx95-verdin: Split UART_2 pinctrl group

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

Some carrier board reuse the UART_2 control signals as GPIO, split
the pinctrl RTS/CTS in separated nodes to maximize flexibility.

Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 .../arm64/boot/dts/freescale/imx95-verdin.dtsi | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx95-verdin.dtsi
index d3737956e2f9..72e7f1e88409 100644
--- a/arch/arm64/boot/dts/freescale/imx95-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-verdin.dtsi
@@ -541,7 +541,7 @@ &lpuart7 {
 /* Verdin UART_2 */
 &lpuart8 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart8>;
+	pinctrl-0 = <&pinctrl_uart8>, <&pinctrl_uart8_cts>, <&pinctrl_uart8_rts>;
 	uart-has-rtscts;
 };
 
@@ -1058,12 +1058,20 @@ pinctrl_uart7: uart7grp {
 			   <IMX95_PAD_GPIO_IO11__LPUART7_RTS_B	0x31e>; /* SODIMM 133 */
 	};
 
-	/* Verdin UART_2 */
+	/* Verdin UART_2 CTS */
+	pinctrl_uart8_cts: uart8ctsgrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO14__LPUART8_CTS_B	0x31e>; /* SODIMM 143 */
+	};
+
+	/* Verdin UART_2 RTS */
+	pinctrl_uart8_rts: uart8rtsgrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO15__LPUART8_RTS_B	0x31e>; /* SODIMM 141 */
+	};
+
+	/* Verdin UART_2 RX/TX */
 	pinctrl_uart8: uart8grp {
 		fsl,pins = <IMX95_PAD_GPIO_IO12__LPUART8_TX	0x31e>, /* SODIMM 139 */
-			   <IMX95_PAD_GPIO_IO13__LPUART8_RX	0x31e>, /* SODIMM 137 */
-			   <IMX95_PAD_GPIO_IO14__LPUART8_CTS_B	0x31e>, /* SODIMM 143 */
-			   <IMX95_PAD_GPIO_IO15__LPUART8_RTS_B	0x31e>; /* SODIMM 141 */
+			   <IMX95_PAD_GPIO_IO13__LPUART8_RX	0x31e>; /* SODIMM 137 */
 	};
 
 	/* On-module eMMC */
-- 
2.47.3