[PATCH 3/3] arm64: dts: imx8mp-ab2: Correct interrupt flags

[Krzysztof Kozlowski]

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 => IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 => IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted the
same logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW

Fixes: bf68c18150ef ("arm64: dts: imx8mp-ab2: add support for NXP i.MX8MP audio board (version 2)")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-ab2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts b/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts
index dbbc0df0e3d1..443e4fd5b9bf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts
@@ -281,7 +281,7 @@ pca9450: pmic at 25 {
 		compatible = "nxp,pca9450c";
 		reg = <0x25>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <3 GPIO_ACTIVE_LOW>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&pinctrl_pmic>;
 
 		regulators {
-- 
2.51.0