[PATCH 2/3] arm64: dts: imx8mn-vhip4-evalboard-v2: Correct interrupt flags

[Krzysztof Kozlowski]

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 => IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 => IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted the
same logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW

Fixes: 5eb7405db99b ("arm64: dts: imx8mn: Add ifm VHIP4 EvalBoard v1 and v2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
---
 arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts b/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts
index 4dadfb7f78de..43fd4d0041ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts
@@ -99,7 +99,7 @@ &i2c3 {
 
 &ifm_pmic {
 	interrupt-parent = <&gpio5>;
-	interrupts = <17 GPIO_ACTIVE_LOW>;
+	interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &iomuxc {
-- 
2.51.0