[PATCH v2 3/4] ARM: dts: qcom: msm8974pro-htc-m8: add Bluetooth pins

[Alexandre Messier via B4 Relay]

From: Alexandre Messier <alex at me.ssier.org>

Add the required pin configuration to enable Bluetooth.

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
Signed-off-by: Alexandre Messier <alex at me.ssier.org>
---
 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
index f24882dbeef3..2edf407db567 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
@@ -354,10 +354,19 @@ cmd-data-pins {
 	};
 
 	wcnss_pin_a: wcnss-pin-active-state {
-		pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-		function = "wlan";
-		drive-strength = <6>;
-		bias-pull-down;
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wlan-pins {
+			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
 	};
 };
 

-- 
2.53.0