[PATCH v6 06/10] clk: realtek: Add support for mux clock

[Brian Masney]

Hi Yu-Chun and Cheng-Yu,

On Thu, Apr 02, 2026 at 03:39:53PM +0800, Yu-Chun Lin wrote:
> From: Cheng-Yu Lee <cylee12 at realtek.com>
> 
> Add a simple regmap-based clk_ops implementation for Realtek mux clocks.
> 
> The implementation supports parent selection and rate determination through
> regmap-backed register access.
> 
> Signed-off-by: Cheng-Yu Lee <cylee12 at realtek.com>
> Co-developed-by: Yu-Chun Lin <eleanor.lin at realtek.com>
> Signed-off-by: Yu-Chun Lin <eleanor.lin at realtek.com>
> ---
> Changes in v6:
> - Add the headers used in c file to follow the "Include What You Use" principle.
> ---
>  drivers/clk/realtek/Makefile         |  1 +
>  drivers/clk/realtek/clk-regmap-mux.c | 48 ++++++++++++++++++++++++++++
>  drivers/clk/realtek/clk-regmap-mux.h | 43 +++++++++++++++++++++++++
>  3 files changed, 92 insertions(+)
>  create mode 100644 drivers/clk/realtek/clk-regmap-mux.c
>  create mode 100644 drivers/clk/realtek/clk-regmap-mux.h
> 
> diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
> index 74375f8127ac..f90dc57fcfdb 100644
> --- a/drivers/clk/realtek/Makefile
> +++ b/drivers/clk/realtek/Makefile
> @@ -5,4 +5,5 @@ clk-rtk-y += common.o
>  
>  clk-rtk-y += clk-pll.o
>  clk-rtk-y += clk-regmap-gate.o
> +clk-rtk-y += clk-regmap-mux.o
>  clk-rtk-y += freq_table.o
> diff --git a/drivers/clk/realtek/clk-regmap-mux.c b/drivers/clk/realtek/clk-regmap-mux.c
> new file mode 100644
> index 000000000000..068b056d61f0
> --- /dev/null
> +++ b/drivers/clk/realtek/clk-regmap-mux.c
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2017 Realtek Semiconductor Corporation
> + * Author: Cheng-Yu Lee <cylee12 at realtek.com>
> + */
> +
> +#include <linux/regmap.h>
> +#include <linux/clk-provider.h>

Sort the includes.

> +#include "clk-regmap-mux.h"
> +
> +static u8 clk_regmap_mux_get_parent(struct clk_hw *hw)
> +{
> +	struct clk_regmap_mux *clkm = to_clk_regmap_mux(hw);
> +	int num_parents = clk_hw_get_num_parents(hw);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(clkm->clkr.regmap, clkm->mux_ofs, &val);
> +	if (ret)
> +		return 0;

This is another case where it'd be nice to get the get_parent
declaration fixed. Stephen recently linked to some work of his from 2022
here.

https://lore.kernel.org/linux-clk/177431305509.5403.15386021337517970667@lazor/

There's nothing for you to do right now.

> +
> +	val = val >> clkm->shift & clkm->mask;

I know there's the order of operations, however for clarity I would just
include some () here to make it clear the expected order.
> +
> +	if (val >= num_parents)

Remove newline before if.

> +		return 0;
> +
> +	return val;

Or you could just use a ternary operator:

return val >= num_parents ? 0 : val;

> +}
> +
> +static int clk_regmap_mux_set_parent(struct clk_hw *hw, u8 index)
> +{
> +	struct clk_regmap_mux *clkm = to_clk_regmap_mux(hw);
> +
> +	return regmap_update_bits(clkm->clkr.regmap, clkm->mux_ofs,
> +				  clkm->mask << clkm->shift, index << clkm->shift);
> +}
> +
> +const struct clk_ops rtk_clk_regmap_mux_ops = {
> +	.set_parent = clk_regmap_mux_set_parent,
> +	.get_parent = clk_regmap_mux_get_parent,
> +	.determine_rate = __clk_mux_determine_rate,
> +};
> +EXPORT_SYMBOL_NS_GPL(rtk_clk_regmap_mux_ops, "REALTEK_CLK");
> +
> +const struct clk_ops rtk_clk_regmap_mux_ro_ops = {
> +	.get_parent = clk_regmap_mux_get_parent,
> +};
> +EXPORT_SYMBOL_NS_GPL(rtk_clk_regmap_mux_ro_ops, "REALTEK_CLK");

rtk_clk_regmap_mux_ro_ops is exported, however the declaration is not actually
declared in any header files.

Brian