[PATCH v20 06/10] power: reset: Add psci-reboot-mode driver

[Shivendra Pratap]

On 01-04-2026 20:07, Lorenzo Pieralisi wrote:
> On Tue, Mar 31, 2026 at 11:30:09PM +0530, Shivendra Pratap wrote:
>>
>>
>> On 27-03-2026 19:25, Lorenzo Pieralisi wrote:
>>> On Wed, Mar 04, 2026 at 11:33:06PM +0530, Shivendra Pratap wrote:
>>>> PSCI supports different types of resets like COLD reset, ARCH WARM

[snip..]

>>>> + * Predefined reboot-modes are defined as per the values
>>>> + * of enum reboot_mode defined in the kernel: reboot.c.
>>>> + */
>>>> +static struct mode_info psci_resets[] = {
>>>> +	{ .mode = "warm", .magic = REBOOT_WARM},
>>>> +	{ .mode = "soft", .magic = REBOOT_SOFT},
>>>> +	{ .mode = "cold", .magic = REBOOT_COLD},
> 
> These strings match the command userspace issue right ? I think that we
> should make them match the corresponding PSCI reset types, the list above
> maps command to reboot_mode values and those can belong to any reboot
> mode driver to be honest they don't make much sense in a PSCI reboot
> mode driver only.
> 
> It is a question for everyone here: would it make sense to make these
> predefined resets a set of strings, eg:
> 
> psci-system-reset
> psci-system-reset2-arch-warm-reset
> 
> and then vendor resets:
> 
> psci-system-reset2-vendor-reset

Can you share bit more details on this? We are already defining the 
string from userspace in the struct - eg: ".mode = "warm".

yes we can move away from enum reboot_mode and use custom psci defines 
one - Ack.

> 

[snip ..]

>>>> +
>>>> +/*
>>>> + * arg1 is reset_type(Low 32 bit of magic).
>>>> + * arg2 is cookie(High 32 bit of magic).
>>>> + * If reset_type is 0, cookie will be used to decide the reset command.
>>>> + */
>>>> +static int psci_reboot_mode_write(struct reboot_mode_driver *reboot, u64 magic)
>>>> +{
>>>> +	u32 reset_type = REBOOT_MODE_ARG1(magic);
>>>> +	u32 cookie = REBOOT_MODE_ARG2(magic);
>>>> +
>>>> +	if (reset_type == 0) {
>>>> +		if (cookie == REBOOT_WARM || cookie == REBOOT_SOFT)
>>>> +			psci_set_reset_cmd(true, 0, 0);
>>>> +		else
>>>> +			psci_set_reset_cmd(false, 0, 0);
>>>> +	} else {
>>>> +		psci_set_reset_cmd(true, reset_type, cookie);
>>>> +	}
>>>
>>> I don't think that psci_set_reset_cmd() has the right interface (and this
>>> nested if is too complicated for my taste). All we need to pass is reset-type
>>> and cookie (and if the reset is one of the predefined ones, reset-type is 0
>>> and cookie is the REBOOT_* cookie).
>>>
>>> Then the PSCI firmware driver will take the action according to what
>>> resets are available.
>>>
>>> How does it sound ?
>>
>> So we mean these checks will move to the psci driver? Sorry for re-iterating
>> the question.
> 
> Given what I say above, I believe that something we can do is mapping the magic
> to an enum like:
> 
> PSCI_SYSTEM_RESET
> PSCI_SYSTEM_RESET2_ARCH_SYSTEM_WARM_RESET
> PSCI_SYSTEM_RESET2_VENDOR_RESET
> 
> and can add a probe function into PSCI driver similar to psci_has_osi_support() but
> to probe for SYSTEM_RESET2 and initialize the predefined strings accordingly,
> depending on its presence.

Not able to get it cleanly.

1. Will move away from reboot_mode enum for pre-defined modes and define 
new enum defining these modes- fine.
2. get SYSTEM_RESET2 is supported from psci exported function -- fine, 
but how we use it here now, as we do not want to send the reset_cmd from 
  psci_set_reset_cmd now?
3. For pre-defined modes, warm/soft or cold - reset_type and cookie, 
both are zero, sys_reset2 or sys_reset2 decides the ARCH reset vs cold 
reset.
4. For vendor-rest , we use sys_reset2 with reset_type and cookie.

All above is done in reboot_notifier call at psci-reboot-mode.
--

Now in the final restart_notifier->psci_sys_reset --

If panic is in progress, we do not use any of the cmd based reset params 
and go with the legacy reset. So we need to preserve the values that 
were set from psci-reboot-mode.

Did not understand the proposed suggestion in above usecase. Need more 
input on this.
--

One other option is to have a restart_notifier in psci-reboot-mode, with 
lesser priority than psci_sys_rest and then handle all the case 
including panic and sys_reset2.

thanks,
Shivendra