[PATCH v4 3/4] PCI: tegra: Add Tegra264 support
Manivannan Sadhasivam
mani at kernel.org
Thu Apr 2 10:32:02 PDT 2026
On Thu, Apr 02, 2026 at 04:27:37PM +0200, Thierry Reding wrote:
> From: Thierry Reding <treding at nvidia.com>
>
> Add a driver for the PCIe controller found on NVIDIA Tegra264 SoCs. The
> driver is very small, with its main purpose being to set up the address
> translation registers and then creating a standard PCI host using ECAM.
>
> Signed-off-by: Manikanta Maddireddy <mmaddireddy at nvidia.com>
> Signed-off-by: Thierry Reding <treding at nvidia.com>
What is the rationale for adding a new driver? Can't you reuse the existing one?
If so, that should be mentioned in the description.
> ---
> Changes in v2:
> - specify generations applicable for PCI_TEGRA driver to avoid confusion
> - drop SPDX-FileCopyrightText tag
> - rename link_state to link_up to clarify meaning
> - replace memset() by an empty initializer
> - sanity-check only enable BAR regions
> - bring PCI link out of reset in case firmware didn't
> - use common wait times instead of defining our own
> - use core helpers to parse and print PCI link speed
> - fix multi-line comment
> - use dev_err_probe() more ubiquitously
> - fix probe sequence and error cleanup
> - use DEFINE_NOIRQ_DEV_PM_OPS() to avoid warnings for !PM_SUSPEND
> - reuse more standard registers and remove unused register definitions
> - use %pe and ERR_PTR() to print symbolic errors
> - add signed-off-by from Manikanta as the original author
> - add myself as author after significantly modifying the driver
> ---
> drivers/pci/controller/Kconfig | 10 +-
> drivers/pci/controller/Makefile | 1 +
> drivers/pci/controller/pcie-tegra264.c | 527 +++++++++++++++++++++++++++++++++
> 3 files changed, 537 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index 5aaed8ac6e44..6ead04f7bd6e 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -254,7 +254,15 @@ config PCI_TEGRA
> select IRQ_MSI_LIB
> help
> Say Y here if you want support for the PCIe host controller found
> - on NVIDIA Tegra SoCs.
> + on NVIDIA Tegra SoCs (Tegra20 through Tegra186).
> +
> +config PCIE_TEGRA264
> + bool "NVIDIA Tegra264 PCIe controller"
This driver seems to be using external MSI controller. So it can be built as a
module. Also, you have the remove() callback for some reason.
> + depends on ARCH_TEGRA || COMPILE_TEST
> + depends on PCI_MSI
Why?
> + help
> + Say Y here if you want support for the PCIe host controller found
> + on NVIDIA Tegra264 SoCs.
>
> config PCIE_RCAR_HOST
> bool "Renesas R-Car PCIe controller (host mode)"
> diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> index ac8db283f0fe..d478743b5142 100644
> --- a/drivers/pci/controller/Makefile
> +++ b/drivers/pci/controller/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_PCI_HYPERV_INTERFACE) += pci-hyperv-intf.o
> obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
> obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
> obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
> +obj-$(CONFIG_PCIE_TEGRA264) += pcie-tegra264.o
> obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
> obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar.o pcie-rcar-host.o
> obj-$(CONFIG_PCIE_RCAR_EP) += pcie-rcar.o pcie-rcar-ep.o
> diff --git a/drivers/pci/controller/pcie-tegra264.c b/drivers/pci/controller/pcie-tegra264.c
> new file mode 100644
> index 000000000000..3ce1ad971bdb
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-tegra264.c
> @@ -0,0 +1,527 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * PCIe host controller driver for Tegra264 SoC
> + *
> + * Copyright (c) 2022-2026, NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/init.h>
> +#include <linux/interconnect.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/pci-ecam.h>
> +#include <linux/pci.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#include <soc/tegra/bpmp.h>
> +#include <soc/tegra/bpmp-abi.h>
> +#include <soc/tegra/fuse.h>
> +
> +#include "../pci.h"
> +
> +/* XAL registers */
> +#define XAL_RC_ECAM_BASE_HI 0x00
> +#define XAL_RC_ECAM_BASE_LO 0x04
> +#define XAL_RC_ECAM_BUSMASK 0x08
> +#define XAL_RC_IO_BASE_HI 0x0c
> +#define XAL_RC_IO_BASE_LO 0x10
> +#define XAL_RC_IO_LIMIT_HI 0x14
> +#define XAL_RC_IO_LIMIT_LO 0x18
> +#define XAL_RC_MEM_32BIT_BASE_HI 0x1c
> +#define XAL_RC_MEM_32BIT_BASE_LO 0x20
> +#define XAL_RC_MEM_32BIT_LIMIT_HI 0x24
> +#define XAL_RC_MEM_32BIT_LIMIT_LO 0x28
> +#define XAL_RC_MEM_64BIT_BASE_HI 0x2c
> +#define XAL_RC_MEM_64BIT_BASE_LO 0x30
> +#define XAL_RC_MEM_64BIT_LIMIT_HI 0x34
> +#define XAL_RC_MEM_64BIT_LIMIT_LO 0x38
> +#define XAL_RC_BAR_CNTL_STANDARD 0x40
> +#define XAL_RC_BAR_CNTL_STANDARD_IOBAR_EN BIT(0)
> +#define XAL_RC_BAR_CNTL_STANDARD_32B_BAR_EN BIT(1)
> +#define XAL_RC_BAR_CNTL_STANDARD_64B_BAR_EN BIT(2)
> +
> +/* XTL registers */
> +#define XTL_RC_PCIE_CFG_LINK_STATUS 0x5a
> +
> +#define XTL_RC_MGMT_PERST_CONTROL 0x218
> +#define XTL_RC_MGMT_PERST_CONTROL_PERST_O_N BIT(0)
> +
> +#define XTL_RC_MGMT_CLOCK_CONTROL 0x47c
> +#define XTL_RC_MGMT_CLOCK_CONTROL_PEX_CLKREQ_I_N_PIN_USE_CONV_TO_PRSNT BIT(9)
> +
> +struct tegra264_pcie {
> + struct device *dev;
> + bool link_up;
Keep bool types at the end to avoid holes.
> +
> + /* I/O memory */
> + void __iomem *xal;
> + void __iomem *xtl;
> + void __iomem *ecam;
> +
> + /* bridge configuration */
> + struct pci_config_window *cfg;
> + struct pci_host_bridge *bridge;
> +
> + /* wake IRQ */
> + struct gpio_desc *wake_gpio;
> + unsigned int wake_irq;
> +
> + /* BPMP and bandwidth management */
> + struct icc_path *icc_path;
> + struct tegra_bpmp *bpmp;
> + u32 ctl_id;
> +};
> +
> +static int tegra264_pcie_parse_dt(struct tegra264_pcie *pcie)
> +{
> + int err;
> +
> + pcie->wake_gpio = devm_gpiod_get_optional(pcie->dev, "nvidia,pex-wake",
You should switch to standard 'wake-gpios' property.
> + GPIOD_IN);
> + if (IS_ERR(pcie->wake_gpio))
> + return PTR_ERR(pcie->wake_gpio);
> +
> + if (pcie->wake_gpio) {
Since you are bailing out above, you don't need this check.
> + device_init_wakeup(pcie->dev, true);
> +
> + err = gpiod_to_irq(pcie->wake_gpio);
> + if (err < 0) {
> + dev_err(pcie->dev, "failed to get wake IRQ: %pe\n",
> + ERR_PTR(err));
> + return err;
> + }
> +
> + pcie->wake_irq = (unsigned int)err;
> + }
> +
> + return 0;
> +}
> +
> +static void tegra264_pcie_bpmp_set_rp_state(struct tegra264_pcie *pcie)
I don't think this function name is self explanatory. Looks like it is turning
off the PCIe controller, so how about tegra264_pcie_power_off()?
> +{
> + struct tegra_bpmp_message msg = {};
> + struct mrq_pcie_request req = {};
> + int err;
> +
> + req.cmd = CMD_PCIE_RP_CONTROLLER_OFF;
> + req.rp_ctrlr_off.rp_controller = pcie->ctl_id;
> +
> + msg.mrq = MRQ_PCIE;
> + msg.tx.data = &req;
> + msg.tx.size = sizeof(req);
> +
> + err = tegra_bpmp_transfer(pcie->bpmp, &msg);
> + if (err)
> + dev_info(pcie->dev, "failed to turn off PCIe #%u: %pe\n",
Why not dev_err()?
> + pcie->ctl_id, ERR_PTR(err));
> +
> + if (msg.rx.ret)
> + dev_info(pcie->dev, "failed to turn off PCIe #%u: %d\n",
Same here.
> + pcie->ctl_id, msg.rx.ret);
> +}
> +
> +static void tegra264_pcie_icc_set(struct tegra264_pcie *pcie)
> +{
> + u32 value, speed, width, bw;
> + int err;
> +
> + value = readw(pcie->ecam + XTL_RC_PCIE_CFG_LINK_STATUS);
> + speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, value);
> + width = FIELD_GET(PCI_EXP_LNKSTA_NLW, value);
> +
> + bw = width * (PCIE_SPEED2MBS_ENC(speed) / BITS_PER_BYTE);
> + value = MBps_to_icc(bw);
So this becomes, 'width * (PCIE_SPEED2MBS_ENC(speed) / 8) * 1000 / 8'. But don't
you want, 'width * (PCIE_SPEED2MBS_ENC(speed)) * 1000 / 8'?
> +
> + err = icc_set_bw(pcie->icc_path, bw, bw);
> + if (err < 0)
> + dev_err(pcie->dev,
> + "failed to request bandwidth (%u MBps): %pe\n",
> + bw, ERR_PTR(err));
So you don't want to error out if this fails?
> +}
> +
> +/*
> + * The various memory regions used by the controller (I/O, memory, ECAM) are
> + * set up during early boot and have hardware-level protections in place. If
> + * the DT ranges don't match what's been setup, the controller won't be able
> + * to write the address endpoints properly, so make sure to validate that DT
> + * and firmware programming agree on these ranges.
> + */
> +static bool tegra264_pcie_check_ranges(struct platform_device *pdev)
> +{
> + struct tegra264_pcie *pcie = platform_get_drvdata(pdev);
> + struct device_node *np = pcie->dev->of_node;
> + struct of_pci_range_parser parser;
> + phys_addr_t phys, limit, hi, lo;
> + struct of_pci_range range;
> + struct resource *res;
> + bool status = true;
> + u32 value;
> + int err;
> +
> + err = of_pci_range_parser_init(&parser, np);
> + if (err < 0)
> + return false;
> +
> + for_each_of_pci_range(&parser, &range) {
> + unsigned int addr_hi, addr_lo, limit_hi, limit_lo, enable;
> + unsigned long type = range.flags & IORESOURCE_TYPE_BITS;
> + phys_addr_t start, end, mask;
> + const char *region = NULL;
> +
> + end = range.cpu_addr + range.size - 1;
> + start = range.cpu_addr;
> +
> + switch (type) {
> + case IORESOURCE_IO:
> + addr_hi = XAL_RC_IO_BASE_HI;
> + addr_lo = XAL_RC_IO_BASE_LO;
> + limit_hi = XAL_RC_IO_LIMIT_HI;
> + limit_lo = XAL_RC_IO_LIMIT_LO;
> + enable = XAL_RC_BAR_CNTL_STANDARD_IOBAR_EN;
> + mask = SZ_64K - 1;
> + region = "I/O";
> + break;
> +
> + case IORESOURCE_MEM:
> + if (range.flags & IORESOURCE_PREFETCH) {
> + addr_hi = XAL_RC_MEM_64BIT_BASE_HI;
> + addr_lo = XAL_RC_MEM_64BIT_BASE_LO;
> + limit_hi = XAL_RC_MEM_64BIT_LIMIT_HI;
> + limit_lo = XAL_RC_MEM_64BIT_LIMIT_LO;
> + enable = XAL_RC_BAR_CNTL_STANDARD_64B_BAR_EN;
> + region = "prefetchable memory";
> + } else {
> + addr_hi = XAL_RC_MEM_32BIT_BASE_HI;
> + addr_lo = XAL_RC_MEM_32BIT_BASE_LO;
> + limit_hi = XAL_RC_MEM_32BIT_LIMIT_HI;
> + limit_lo = XAL_RC_MEM_32BIT_LIMIT_LO;
> + enable = XAL_RC_BAR_CNTL_STANDARD_32B_BAR_EN;
> + region = "memory";
> + }
> +
> + mask = SZ_1M - 1;
> + break;
> + }
> +
> + /* not interested in anything that's not I/O or memory */
> + if (!region)
> + continue;
> +
> + /* don't check regions that haven't been enabled */
> + value = readl(pcie->xal + XAL_RC_BAR_CNTL_STANDARD);
> + if ((value & enable) == 0)
> + continue;
> +
> + hi = readl(pcie->xal + addr_hi);
> + lo = readl(pcie->xal + addr_lo);
> + phys = hi << 32 | lo;
> +
> + hi = readl(pcie->xal + limit_hi);
> + lo = readl(pcie->xal + limit_lo);
> + limit = hi << 32 | lo | mask;
> +
> + if (phys != start || limit != end) {
> + dev_err(pcie->dev,
> + "%s region mismatch: %pap-%pap -> %pap-%pap\n",
> + region, &phys, &limit, &start, &end);
> + status = false;
> + }
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ecam");
> + if (!res)
> + return false;
> +
> + hi = readl(pcie->xal + XAL_RC_ECAM_BASE_HI);
> + lo = readl(pcie->xal + XAL_RC_ECAM_BASE_LO);
> + phys = hi << 32 | lo;
> +
> + value = readl(pcie->xal + XAL_RC_ECAM_BUSMASK);
> + limit = phys + ((value + 1) << 20) - 1;
> +
> + if (phys != res->start || limit != res->end) {
> + dev_err(pcie->dev,
> + "ECAM region mismatch: %pap-%pap -> %pap-%pap\n",
> + &phys, &limit, &res->start, &res->end);
> + status = false;
> + }
> +
> + return status;
> +}
> +
> +static bool tegra264_pcie_link_up(struct tegra264_pcie *pcie,
> + enum pci_bus_speed *speed)
> +{
> + u16 value = readw(pcie->ecam + XTL_RC_PCIE_CFG_LINK_STATUS);
> +
> + if (value & PCI_EXP_LNKSTA_DLLLA) {
> + if (speed)
> + *speed = pcie_link_speed[FIELD_GET(PCI_EXP_LNKSTA_CLS,
> + value)];
> +
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static void tegra264_pcie_init(struct tegra264_pcie *pcie)
> +{
> + enum pci_bus_speed speed;
> + unsigned int i;
> + u32 value;
> +
> + /* bring the link out of reset */
s/link/controller or endpoint?
> + value = readl(pcie->xtl + XTL_RC_MGMT_PERST_CONTROL);
> + value |= XTL_RC_MGMT_PERST_CONTROL_PERST_O_N;
> + writel(value, pcie->xtl + XTL_RC_MGMT_PERST_CONTROL);
> +
> + if (!tegra_is_silicon()) {
This looks like some pre-silicon validation thing. Do you really want it to be
present in the upstream driver?
> + dev_info(pcie->dev,
> + "skipping link state for PCIe #%u in simulation\n",
> + pcie->ctl_id);
> + pcie->link_up = true;
> + return;
> + }
> +
> + for (i = 0; i < PCIE_LINK_WAIT_MAX_RETRIES; i++) {
> + if (tegra264_pcie_link_up(pcie, NULL))
> + break;
> +
> + usleep_range(PCIE_LINK_WAIT_US_MIN, PCIE_LINK_WAIT_US_MAX);
> + }
> +
> + if (tegra264_pcie_link_up(pcie, &speed)) {
Why are you doing it for the second time?
> + /* Per PCIe r5.0, 6.6.1 wait for 100ms after DLL up */
No need of this comment.
> + msleep(PCIE_RESET_CONFIG_WAIT_MS);
> +
> + dev_info(pcie->dev, "PCIe #%u link is up (speed: %s)\n",
> + pcie->ctl_id, pci_speed_string(speed));
> + tegra264_pcie_icc_set(pcie);
> + pcie->link_up = true;
> + } else {
> + dev_info(pcie->dev, "PCIe #%u link is down\n", pcie->ctl_id);
> +
> + value = readl(pcie->xtl + XTL_RC_MGMT_CLOCK_CONTROL);
> +
> + /*
> + * Set link state only when link fails and no hot-plug feature
> + * is present.
> + */
> + if ((value & XTL_RC_MGMT_CLOCK_CONTROL_PEX_CLKREQ_I_N_PIN_USE_CONV_TO_PRSNT) == 0) {
> + dev_info(pcie->dev,
> + "PCIe #%u link is down and not hotplug-capable, turning off\n",
> + pcie->ctl_id);
> + tegra264_pcie_bpmp_set_rp_state(pcie);
> + pcie->link_up = false;
> + } else {
> + pcie->link_up = true;
> + }
> + }
> +}
> +
> +static int tegra264_pcie_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct pci_host_bridge *bridge;
> + struct tegra264_pcie *pcie;
> + struct resource_entry *bus;
> + struct resource *res;
> + int err;
> +
> + bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct tegra264_pcie));
> + if (!bridge)
> + return dev_err_probe(dev, -ENOMEM,
> + "failed to allocate host bridge\n");
> +
> + pcie = pci_host_bridge_priv(bridge);
> + platform_set_drvdata(pdev, pcie);
> + pcie->bridge = bridge;
> + pcie->dev = dev;
> +
> + err = pinctrl_pm_select_default_state(dev);
I questioned this before:
https://lore.kernel.org/linux-pci/o5sxxdikdjwd76zsedvkpsl54nw6wrhopwsflt43y5st67mrub@uuw3yfjfqthd/
> + if (err < 0)
> + return dev_err_probe(dev, err,
> + "failed to configure sideband pins\n");
> +
> + err = tegra264_pcie_parse_dt(pcie);
> + if (err < 0)
> + return dev_err_probe(dev, err, "failed to parse device tree");
> +
> + pcie->xal = devm_platform_ioremap_resource_byname(pdev, "xal");
> + if (IS_ERR(pcie->xal))
> + return dev_err_probe(dev, PTR_ERR(pcie->xal),
> + "failed to map XAL memory\n");
> +
> + pcie->xtl = devm_platform_ioremap_resource_byname(pdev, "xtl-pri");
> + if (IS_ERR(pcie->xtl))
> + return dev_err_probe(dev, PTR_ERR(pcie->xtl),
> + "failed to map XTL-PRI memory\n");
> +
> + bus = resource_list_first_type(&bridge->windows, IORESOURCE_BUS);
> + if (!bus)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get bus resources\n");
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ecam");
> + if (!res)
> + return dev_err_probe(dev, -ENXIO,
> + "failed to get ECAM resource\n");
> +
> + pcie->icc_path = devm_of_icc_get(&pdev->dev, "write");
> + if (IS_ERR(pcie->icc_path))
> + return dev_err_probe(&pdev->dev, PTR_ERR(pcie->icc_path),
> + "failed to get ICC");
> +
> + /*
> + * Parse BPMP property only for silicon, as interaction with BPMP is
> + * not needed for other platforms.
> + */
> + if (tegra_is_silicon()) {
> + pcie->bpmp = tegra_bpmp_get_with_id(dev, &pcie->ctl_id);
> + if (IS_ERR(pcie->bpmp))
> + return dev_err_probe(dev, PTR_ERR(pcie->bpmp),
> + "failed to get BPMP\n");
> + }
> +
pm_runtime_set_active()
> + pm_runtime_enable(dev);
devm_pm_runtime_enable()?
> + pm_runtime_get_sync(dev);
> +
> + /* sanity check that programmed ranges match what's in DT */
> + if (!tegra264_pcie_check_ranges(pdev)) {
> + err = -EINVAL;
> + goto put_pm;
> + }
> +
> + pcie->cfg = pci_ecam_create(dev, res, bus->res, &pci_generic_ecam_ops);
> + if (IS_ERR(pcie->cfg)) {
> + err = dev_err_probe(dev, PTR_ERR(pcie->cfg),
> + "failed to create ECAM\n");
> + goto put_pm;
> + }
> +
> + bridge->ops = (struct pci_ops *)&pci_generic_ecam_ops.pci_ops;
> + bridge->sysdata = pcie->cfg;
> + pcie->ecam = pcie->cfg->win;
> +
> + tegra264_pcie_init(pcie);
> +
> + if (!pcie->link_up)
> + goto free;
goto free_ecam;
> +
> + err = pci_host_probe(bridge);
> + if (err < 0) {
> + dev_err(dev, "failed to register host: %pe\n", ERR_PTR(err));
dev_err_probe()
> + goto free;
> + }
> +
> + return err;
return 0;
> +
> +free:
> + pci_ecam_free(pcie->cfg);
> +put_pm:
> + pm_runtime_put_sync(dev);
> + pm_runtime_disable(dev);
> +
> + if (tegra_is_silicon())
> + tegra_bpmp_put(pcie->bpmp);
> +
> + return err;
> +}
> +
> +static void tegra264_pcie_remove(struct platform_device *pdev)
> +{
> + struct tegra264_pcie *pcie = platform_get_drvdata(pdev);
> +
> + /*
> + * If we undo tegra264_pcie_init() then link goes down and need
> + * controller reset to bring up the link again. Remove intention is
> + * to clean up the root bridge and re-enumerate during bind.
> + */
> + pci_lock_rescan_remove();
> + pci_stop_root_bus(pcie->bridge->bus);
> + pci_remove_root_bus(pcie->bridge->bus);
> + pci_unlock_rescan_remove();
> +
> + pm_runtime_put_sync(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +
> + if (tegra_is_silicon())
> + tegra_bpmp_put(pcie->bpmp);
> +
> + pci_ecam_free(pcie->cfg);
> +}
> +
> +static int tegra264_pcie_suspend_noirq(struct device *dev)
> +{
> + struct tegra264_pcie *pcie = dev_get_drvdata(dev);
> + int err;
> +
> + if (pcie->wake_gpio && device_may_wakeup(dev)) {
> + err = enable_irq_wake(pcie->wake_irq);
> + if (err < 0)
> + dev_err(dev, "failed to enable wake IRQ: %pe\n",
> + ERR_PTR(err));
> + }
> +
> + return 0;
> +}
> +
> +static int tegra264_pcie_resume_noirq(struct device *dev)
> +{
> + struct tegra264_pcie *pcie = dev_get_drvdata(dev);
> + int err;
> +
> + if (pcie->wake_gpio && device_may_wakeup(dev)) {
> + err = disable_irq_wake(pcie->wake_irq);
> + if (err < 0)
> + dev_err(dev, "failed to disable wake IRQ: %pe\n",
> + ERR_PTR(err));
> + }
> +
> + if (pcie->link_up == false)
> + return 0;
> +
> + tegra264_pcie_init(pcie);
> +
Why do you need init() here without deinit() in tegra264_pcie_suspend_noirq()?
- Mani
--
மணிவண்ணன் சதாசிவம்
More information about the linux-arm-kernel
mailing list