[DMARC error]Re: [PATCH 0/2] Add PWM support Amlogic S7 S7D S6

[George Stark]

Hello Xianwei Zhao

On 3/31/26 10:59, Xianwei Zhao wrote:
> Hi George,
> 
> On 2026/3/31 15:33, George Stark wrote:
>> Hello Martin, Xianwei
>>
>>
>> On 3/31/26 10:10, Xianwei Zhao wrote:
>>> Hi Martin,
>>>      I confirmed with Junyi Zhao that the current implementation counts
>>> from zero, so this submission is correct.
>>> We agree this should be fixed and will address it in a follow-up patch.
>>> Thanks for pointing it out.
>>>
>>> On 2026/3/31 05:54, Martin Blumenstingl wrote:
>>>> Hi Xianwei Zhao,
>>>>
>>>> thanks for your contribution!
>>>>
>>>> On Thu, Mar 26, 2026 at 7:35 AM Xianwei Zhao via B4 Relay
>>>> <devnull+xianwei.zhao.amlogic.com at kernel.org>  wrote:
>>>>> Add bindings and driver support Amlogic S7/S7D/S6 SoCs.
>>>> There is an old report that got lost, stating that the current
>>
>> Xianwei Zhao thanks for the confirmation.
>> I am the author of the old report and the corresponding patch and it's
>> not lost. So if the patch is correct I'll be glad to add relevant
>> tested-by tags.
>>
> 
> I will use your patch and won't send a separate one.
> Do you mean I should add a Tested-by tag to your patch?

Yes since you've confirmed the problem exists then your tested-by tag 
would be appropriate. And I'm ok if you resend the patch. Thanks.

>>>> pwm-meson driver has an off-by-one error with the hi and lo fields:
>>>> [0]
>>>> Since you are working on bringing up a new platform: is this something
>>>> you can verify in your lab?
>>>> To be clear: I'm not expecting you to work on this ad-hoc or bring a
>>>> patch into this series. However, it would be great if you could verify
>>>> if the findings from [0] are correct and send an updated patch in
>>>> future.
>>>>
>>>> Thank you and best regards
>>>> Martin 

-- 
Best regards
George