[PATCH 2/5] arm64: dts: freescale: imx91-phyboard-segin: Add gpio-line-names

[Florijan Plohl]

Add gpio-line-names for GPIOs with a defined board-level
function on the PHYTEC phyBOARD-Segin-i.MX91.

Signed-off-by: Florijan Plohl <florijan.plohl at norik.com>
---
 .../dts/freescale/imx91-phyboard-segin.dts     | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts
index 7b18a58024f5..8b19fc17eacd 100644
--- a/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts
@@ -137,6 +137,24 @@ ethphy2: ethernet-phy at 2 {
 	};
 };
 
+&gpio1 {
+	gpio-line-names = "", "USER_LED", "I2C1_SCL", "I2C1_SDA";
+};
+
+&gpio3 {
+	gpio-line-names = "SD1_nCD", "", "", "", "",
+			  "", "", "SD1_nRESET";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "CAN_EN", "", "", "",
+			  "", "", "", "RESET_PHY", "",
+			  "", "RTC_nINT", "PMIC_IRQ_B";
+};
+
 /* CAN */
 &flexcan1 {
 	pinctrl-names = "default";
-- 
2.43.0