[PATCH 4/5] arm64: dts: freescale: imx93-phyboard-nash: Add gpio-line-names

[Florijan Plohl]

Add gpio-line-names for GPIOs with a defined board-level
function on the PHYTEC phyBOARD-Nash-i.MX93.

Signed-off-by: Florijan Plohl <florijan.plohl at norik.com>
---
 .../dts/freescale/imx93-phyboard-nash.dts     | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
index eac389ed30f3..b82192f25498 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
@@ -141,6 +141,37 @@ &flexcan1 {
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names = "", "USER_LED", "I2C2_SCL", "I2C2_SDA";
+};
+
+&gpio2 {
+	gpio-line-names = "SPI6_CS0", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "TPM_nIRQ", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "I2C3_SDA", "I2C3_SCL";
+};
+
+&gpio3 {
+	gpio-line-names = "SD2_nCD", "", "", "", "",
+			  "", "", "SD2_nRESET", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "nENET1_INT";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "nCAN_EN", "", "", "",
+			  "", "", "", "RESET_PHY", "",
+			  "", "RTC_nINT", "PMIC_IRQ_B";
+};
+
 /* I2C2 */
 &lpi2c2 {
 	clock-frequency = <400000>;
-- 
2.43.0