[PATCH v2 02/10] dmaengine: imx-sdma: fix spba-bus handling for i.MX8M
Shengjiu Wang
shengjiu.wang at gmail.com
Wed Apr 1 20:33:52 PDT 2026
On Fri, Sep 12, 2025 at 6:05 AM Marco Felsch <m.felsch at pengutronix.de> wrote:
>
> Starting with i.MX8M* devices there are multiple spba-busses so we can't
> just search the whole DT for the first spba-bus match and take it.
> Instead we need to check for each device to which bus it belongs and
> setup the spba_{start,end}_addr accordingly per sdma_channel.
>
> While on it, don't ignore errors from of_address_to_resource() if they
> are valid.
>
> Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> ---
> drivers/dma/imx-sdma.c | 58 ++++++++++++++++++++++++++++++++++----------------
> 1 file changed, 40 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index 3ecb917214b1268b148a29df697b780bc462afa4..56daaeb7df03986850c9c74273d0816700581dc0 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -429,6 +429,8 @@ struct sdma_desc {
> * @event_mask: event mask used in p_2_p script
> * @watermark_level: value for gReg[7], some script will extend it from
> * basic watermark such as p_2_p
> + * @spba_start_addr: SDMA controller SPBA bus start address
> + * @spba_end_addr: SDMA controller SPBA bus end address
> * @shp_addr: value for gReg[6]
> * @per_addr: value for gReg[2]
> * @status: status of dma channel
> @@ -461,6 +463,8 @@ struct sdma_channel {
> dma_addr_t per_address, per_address2;
> unsigned long event_mask[2];
> unsigned long watermark_level;
> + u32 spba_start_addr;
> + u32 spba_end_addr;
> u32 shp_addr, per_addr;
> enum dma_status status;
> struct imx_dma_data data;
> @@ -534,8 +538,6 @@ struct sdma_engine {
> u32 script_number;
> struct sdma_script_start_addrs *script_addrs;
> const struct sdma_driver_data *drvdata;
> - u32 spba_start_addr;
> - u32 spba_end_addr;
> unsigned int irq;
> dma_addr_t bd0_phys;
> struct sdma_buffer_descriptor *bd0;
> @@ -1236,8 +1238,6 @@ static void sdma_channel_synchronize(struct dma_chan *chan)
>
> static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
> {
> - struct sdma_engine *sdma = sdmac->sdma;
> -
> int lwml = sdmac->watermark_level & SDMA_WATERMARK_LEVEL_LWML;
> int hwml = (sdmac->watermark_level & SDMA_WATERMARK_LEVEL_HWML) >> 16;
>
> @@ -1263,12 +1263,12 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
> swap(sdmac->event_mask[0], sdmac->event_mask[1]);
> }
>
> - if (sdmac->per_address2 >= sdma->spba_start_addr &&
> - sdmac->per_address2 <= sdma->spba_end_addr)
> + if (sdmac->per_address2 >= sdmac->spba_start_addr &&
> + sdmac->per_address2 <= sdmac->spba_end_addr)
> sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SP;
>
> - if (sdmac->per_address >= sdma->spba_start_addr &&
> - sdmac->per_address <= sdma->spba_end_addr)
> + if (sdmac->per_address >= sdmac->spba_start_addr &&
> + sdmac->per_address <= sdmac->spba_end_addr)
> sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP;
>
> sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT;
> @@ -1447,6 +1447,31 @@ static void sdma_desc_free(struct virt_dma_desc *vd)
> kfree(desc);
> }
>
> +static int sdma_config_spba_slave(struct dma_chan *chan)
> +{
> + struct sdma_channel *sdmac = to_sdma_chan(chan);
> + struct device_node *spba_bus;
> + struct resource spba_res;
> + int ret;
> +
> + spba_bus = of_get_parent(chan->slave->of_node);
if the chan is requested by __dma_request_channel(), the chan->slave = NULL
Then there will be an issue here.
Best regards
Shengjiu Wang
> + /* Device doesn't belong to the spba-bus */
> + if (!of_device_is_compatible(spba_bus, "fsl,spba-bus"))
> + return 0;
> +
> + ret = of_address_to_resource(spba_bus, 0, &spba_res);
> + of_node_put(spba_bus);
> + if (ret) {
> + dev_err(sdmac->sdma->dev, "Failed to get spba-bus resources\n");
> + return -EINVAL;
> + }
> +
> + sdmac->spba_start_addr = spba_res.start;
> + sdmac->spba_end_addr = spba_res.end;
> +
> + return 0;
> +}
> +
> static int sdma_alloc_chan_resources(struct dma_chan *chan)
> {
> struct sdma_channel *sdmac = to_sdma_chan(chan);
> @@ -1527,6 +1552,8 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
>
> sdmac->event_id0 = 0;
> sdmac->event_id1 = 0;
> + sdmac->spba_start_addr = 0;
> + sdmac->spba_end_addr = 0;
>
> sdma_set_channel_priority(sdmac, 0);
>
> @@ -1837,6 +1864,7 @@ static int sdma_config(struct dma_chan *chan,
> {
> struct sdma_channel *sdmac = to_sdma_chan(chan);
> struct sdma_engine *sdma = sdmac->sdma;
> + int ret;
>
> memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
>
> @@ -1867,6 +1895,10 @@ static int sdma_config(struct dma_chan *chan,
> sdma_event_enable(sdmac, sdmac->event_id1);
> }
>
> + ret = sdma_config_spba_slave(chan);
> + if (ret)
> + return ret;
> +
> return 0;
> }
>
> @@ -2235,11 +2267,9 @@ static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec,
> static int sdma_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> - struct device_node *spba_bus;
> const char *fw_name;
> int ret;
> int irq;
> - struct resource spba_res;
> int i;
> struct sdma_engine *sdma;
> s32 *saddr_arr;
> @@ -2375,14 +2405,6 @@ static int sdma_probe(struct platform_device *pdev)
> dev_err(&pdev->dev, "failed to register controller\n");
> goto err_register;
> }
> -
> - spba_bus = of_find_compatible_node(NULL, NULL, "fsl,spba-bus");
> - ret = of_address_to_resource(spba_bus, 0, &spba_res);
> - if (!ret) {
> - sdma->spba_start_addr = spba_res.start;
> - sdma->spba_end_addr = spba_res.end;
> - }
> - of_node_put(spba_bus);
> }
>
> /*
>
> --
> 2.47.3
>
>
More information about the linux-arm-kernel
mailing list