[PATCH v10 5/6] power: supply: max77759: add charger driver

[Amit Sunil Dhamne]

Hi Sebastian,

Thanks for the review!

On 4/1/26 4:17 PM, Sebastian Reichel wrote:
> Hi,
>
> On Tue, Mar 31, 2026 at 11:22:20PM +0000, Amit Sunil Dhamne via B4 Relay wrote:
>> +/* Charge Termination Voltage Limits (in mV) */
>> +static const struct linear_range chg_cv_prm_ranges[] = {
>> +	LINEAR_RANGE(3800, 0x38, 0x39, 100),
>> +	LINEAR_RANGE(4000, 0x0, 0x32, 10),
>> +};
> Let me quote from include/linux/power_supply.h:
>
>  * All voltages, currents, charges, energies, time and temperatures in uV,
>  * µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
>  * stated. It's driver's job to convert its raw values to units in which
>  * this class operates.
>
> What makes you think that CONSTANT_CHARGE_VOLTAGE_MAX is
> special?
>
> [...]

It was an oversight, I will fix it.


>
>> +static int max77759_charger_get_property(struct power_supply *psy,
>> +					 enum power_supply_property psp,
>> +					 union power_supply_propval *pval)
>> +{
>> +	struct max77759_charger *chg = power_supply_get_drvdata(psy);
>> +	int ret;
>> +
>> +	switch (psp) {
>> +	case POWER_SUPPLY_PROP_ONLINE:
>> +		ret = get_online(chg);
>> +		break;
>> +	case POWER_SUPPLY_PROP_PRESENT:
>> +		ret = charger_input_valid(chg);
>> +		break;
>> +	case POWER_SUPPLY_PROP_STATUS:
>> +		ret = get_status(chg);
>> +		break;
>> +	case POWER_SUPPLY_PROP_CHARGE_TYPE:
>> +		ret = get_charge_type(chg);
>> +		break;
>> +	case POWER_SUPPLY_PROP_HEALTH:
>> +		ret = get_health(chg);
>> +		break;
>> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
>> +		ret = get_fast_charge_current(chg);
>> +		break;
>> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
>> +		ret = get_float_voltage(chg);
>> +		break;
>> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
>> +		ret = get_input_current_limit(chg);
>> +		break;
>> +	default:
>> +		ret = -EINVAL;
>> +	}
>> +
>> +	pval->intval = ret;
>> +	return ret < 0 ? ret : 0;
> As people like to use existing drivers as reference this definitely
> needs a comment, that none of the properties used by this driver
> support negative values. This is not a general thing as e.g. the
> CHARGE current may be negative depending on the battery being
> charged or discharged (OTG mode).

Ah okay, thanks for letting me know. I will add a comment.


As these patches are already in flight and part of usb-next of the usb
tree, I can send the suggested improvements as a separate patch, if that
works for you and Greg.


BR,

Amit

>
> Greetings,
>
> -- Sebastian