[PATCH net-next v2] net: stmmac: qcom-ethqos: remove MAC_CTRL_REG modification

[patchwork-bot+netdevbpf at kernel.org]

Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba at kernel.org>:

On Thu, 30 Oct 2025 10:20:32 +0000 you wrote:
> When operating in "SGMII" mode (Cisco SGMII or 2500BASE-X), qcom-ethqos
> modifies the MAC control register in its ethqos_configure_sgmii()
> function, which is only called from one path:
> 
> stmmac_mac_link_up()
> +- reads MAC_CTRL_REG
> +- masks out priv->hw->link.speed_mask
> +- sets bits according to speed (2500, 1000, 100, 10) from priv->hw.link.speed*
> +- ethqos_fix_mac_speed()
> |  +- qcom_ethqos_set_sgmii_loopback(false)
> |  +- ethqos_update_link_clk(speed)
> |  `- ethqos_configure(speed)
> |     `- ethqos_configure_sgmii(speed)
> |        +- reads MAC_CTRL_REG,
> |        +- configures PS/FES bits according to speed
> |        `- writes MAC_CTRL_REG as the last operation
> +- sets duplex bit(s)
> +- stmmac_mac_flow_ctrl()
> +- writes MAC_CTRL_REG if changed from original read
> ...
> 
> [...]

Here is the summary with links:
  - [net-next,v2] net: stmmac: qcom-ethqos: remove MAC_CTRL_REG modification
    https://git.kernel.org/netdev/net-next/c/9b443e58a896

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html