[PATCH 11/19] arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for i2c

[Alexander Stein]

A sleep pin mux is not useful if it is the same as the normal pin mux.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
index b7136982700a9..a6ab94208028a 100644
--- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
@@ -165,9 +165,8 @@ &gpio2 {
 
 &lpi2c1 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default", "sleep";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpi2c1>;
-	pinctrl-1 = <&pinctrl_lpi2c1>;
 	status = "okay";
 
 	tmp1075: temperature-sensor at 4a {
@@ -264,9 +263,8 @@ expander1: gpio at 75 {
 /* I2C_CAM0 */
 &lpi2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default", "sleep";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpi2c3>;
-	pinctrl-1 = <&pinctrl_lpi2c3>;
 	status = "okay";
 
 	dp_bridge: dp-bridge at f {
@@ -301,18 +299,16 @@ dp_dsi_in: endpoint {
 /* I2C_CAM1 */
 &lpi2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default", "sleep";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpi2c4>;
-	pinctrl-1 = <&pinctrl_lpi2c4>;
 	status = "okay";
 };
 
 /* I2C_LCD */
 &lpi2c6 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default", "sleep";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpi2c6>;
-	pinctrl-1 = <&pinctrl_lpi2c6>;
 	status = "okay";
 };
 
-- 
2.43.0