[PATCH v7 7/8] arm64: defconfig: Enable TC9563 PWRCTL driver

[Manivannan Sadhasivam]

On Wed, Oct 29, 2025 at 02:15:37PM +0100, Bartosz Golaszewski wrote:
> On Wed, Oct 29, 2025 at 12:30 PM Krishna Chaitanya Chundru
> <krishna.chundru at oss.qualcomm.com> wrote:
> >
> > Enable TC9563 PCIe switch pwrctl driver by default. This is needed
> > to power the PCIe switch which is present in Qualcomm RB3gen2 platform.
> > Without this the switch will not powered up and we can't use the
> > endpoints connected to the switch.
> >
> > Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru at oss.qualcomm.com>
> > ---
> >  arch/arm64/configs/defconfig | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > index e3a2d37bd10423b028f59dc40d6e8ee1c610d6b8..fe5c9951c437a67ac76bf939a9e436eafa3820bf 100644
> > --- a/arch/arm64/configs/defconfig
> > +++ b/arch/arm64/configs/defconfig
> > @@ -249,6 +249,7 @@ CONFIG_PCIE_LAYERSCAPE_GEN4=y
> >  CONFIG_PCI_ENDPOINT=y
> >  CONFIG_PCI_ENDPOINT_CONFIGFS=y
> >  CONFIG_PCI_EPF_TEST=m
> > +CONFIG_PCI_PWRCTRL_TC9563=m
> >  CONFIG_DEVTMPFS=y
> >  CONFIG_DEVTMPFS_MOUNT=y
> >  CONFIG_FW_LOADER_USER_HELPER=y
> >
> > --
> > 2.34.1
> >
> 
> Can't we just do the following in the respective Kconfig entry?
> 
> config PCI_PWRCTRL_TC9563
>     tristate ...
>     default m if ARCH_QCOM

I believe the driver is supposed to support all Toshiba TC9563 switches, but
since we have some hooks for toggling PERST# and they are only added for QCOM
platforms atm, it is OK to select the driver in Kconfig.

- Mani

-- 
மணிவண்ணன் சதாசிவம்