[PATCH v1 3/4] arm64: dts: freescale: imx93-var-som: Add support for WM8904 audio codec

Stefano Radaelli stefano.radaelli21 at gmail.com
Wed Oct 29 12:28:48 PDT 2025


The VAR-SOM-MX93 can integrate the WM8904, a high-performance
ultra-low-power stereo codec optimized for portable audio applications.

This patch adds the WM8904 device to the appropriate I2C bus, enables
the SAI peripheral, and introduces the sound node to expose the
sound card to the system.

Signed-off-by: Stefano Radaelli <stefano.radaelli21 at gmail.com>
---
 .../boot/dts/freescale/imx93-var-som.dtsi     | 93 +++++++++++++++++++
 1 file changed, 93 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
index 368530f5831f..d94b40d1d804 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
@@ -12,6 +12,34 @@ /{
 	model = "Variscite VAR-SOM-MX93 module";
 	compatible = "variscite,var-som-mx93", "fsl,imx93";
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "wm8904-audio";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"IN1L", "Microphone Jack",
+			"IN1R", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,mclk-fs = <256>;
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+
 	usdhc3_pwrseq: mmc-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		post-power-on-delay-ms = <100>;
@@ -152,6 +180,36 @@ ldo5: LDO5 {
 			};
 		};
 	};
+
+	wm8904: audio-codec at 1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk IMX93_CLK_SAI1_GATE>;
+		clock-names = "mclk";
+		AVDD-supply = <&buck5>;
+		CPVDD-supply = <&buck5>;
+		DBVDD-supply = <&buck4>;
+		DCVDD-supply = <&buck5>;
+		MICVDD-supply = <&buck5>;
+		wlf,drc-cfg-names = "default", "peaklimiter", "tradition",
+				    "soft", "music";
+		/*
+		 * Config registers per name, respectively:
+		 * KNEE_IP = 0,   KNEE_OP = 0,     HI_COMP = 1,   LO_COMP = 1
+		 * KNEE_IP = -24, KNEE_OP = -6,    HI_COMP = 1/4, LO_COMP = 1
+		 * KNEE_IP = -42, KNEE_OP = -3,    HI_COMP = 0,   LO_COMP = 1
+		 * KNEE_IP = -45, KNEE_OP = -9,    HI_COMP = 1/8, LO_COMP = 1
+		 * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
+		 */
+		wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
+				   /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
+				   /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;
+		/* GPIO1 = DMIC_CLK, don't touch others */
+		wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
+	};
 };
 
 /* BT module */
@@ -166,6 +224,17 @@ bluetooth {
 	};
 };
 
+&sai1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-1 = <&pinctrl_sai1_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 /* eMMC */
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -247,6 +316,30 @@ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B  0x31e
 		>;
 	};
 
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK                 0x31e
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC                0x31e
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00              0x31e
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00              0x31e
+			MX93_PAD_I2C2_SDA__SAI1_RX_BCLK                 0x31e
+			MX93_PAD_I2C2_SCL__SAI1_RX_SYNC                 0x31e
+			MX93_PAD_UART2_RXD__SAI1_MCLK                   0x31e
+		>;
+	};
+
+	pinctrl_sai1_sleep: sai1-sleepgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12           0x31e
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11          0x31e
+			MX93_PAD_SAI1_TXD0__GPIO1_IO13          0x31e
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14          0x31e
+			MX93_PAD_UART2_RXD__GPIO1_IO06          0x31e
+			MX93_PAD_I2C2_SDA__GPIO1_IO03           0x31e
+			MX93_PAD_I2C2_SCL__GPIO1_IO02           0x31e
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
-- 
2.43.0




More information about the linux-arm-kernel mailing list