[PATCH 2/2] arm64: dts: imx8qxp-mek: Add sensors under i2c1 bus

[Frank Li]

Add sensors under i2c1 bus.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 32 +++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 7b033744554105de6dbc4366f21e3c90f1768deb..9a96018e6f0680ac503135726f4899aca121e7f6 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -450,10 +450,36 @@ i2c at 2 {
 			#size-cells = <0>;
 			reg = <2>;
 
+			accelerometer at 1e {
+				compatible = "nxp,fxos8700";
+				reg = <0x1e>;
+			};
+
+			gyroscope at 21 {
+				compatible = "nxp,fxas21002c";
+				reg = <0x21>;
+			};
+
 			pressure-sensor at 60 {
 				compatible = "fsl,mpl3115";
 				reg = <0x60>;
 			};
+
+			/* Ref SCH-54536 */
+			pressure-sensor at 77 {
+				compatible = "meas,ms5611";
+				reg = <0x77>;
+			};
+
+			inertial-meter at 68 {
+				compatible = "invensense,icm20602";
+				reg = <0x68>;
+			};
+
+			inertial-meter at 69 {
+				compatible = "invensense,iam20380";
+				reg = <0x69>;
+			};
 		};
 
 		i2c at 3 {
@@ -483,6 +509,12 @@ light-sensor at 44 {
 				interrupt-parent = <&lsio_gpio1>;
 				interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 			};
+
+			/* Ref SCH-54536 */
+			light-sensort at 60 {
+				compatible = "vishay,vcnl4035";
+				reg = <0x60>;
+			};
 		};
 	};
 

-- 
2.34.1