[PATCH v3 1/8] reset: imx8mp-audiomix: Fix bad mask values

[Laurentiu Mihalcea]

From: Laurentiu Mihalcea <laurentiu.mihalcea at nxp.com>

As per the i.MX8MP TRM, section 14.2 "AUDIO_BLK_CTRL", table 14.2.3.1.1
"memory map", the definition of the EARC control register shows that the
EARC controller software reset is controlled via bit 0, while the EARC PHY
software reset is controlled via bit 1.

This means that the current definitions of IMX8MP_AUDIOMIX_EARC_RESET_MASK
and IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK are wrong since their values would
imply that the EARC controller software reset is controlled via bit 1 and
the EARC PHY software reset is controlled via bit 2. Fix them.

Fixes: a83bc87cd30a ("reset: imx8mp-audiomix: Prepare the code for more reset bits")
Cc: stable at vger.kernel.org
Reviewed-by: Shengjiu Wang <shengjiu.wang at gmail.com>
Reviewed-by: Frank Li <Frank.Li at nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta at nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea at nxp.com>
---
 drivers/reset/reset-imx8mp-audiomix.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
index 6b357adfe646..eceb37ff5dc5 100644
--- a/drivers/reset/reset-imx8mp-audiomix.c
+++ b/drivers/reset/reset-imx8mp-audiomix.c
@@ -14,8 +14,8 @@
 #include <linux/reset-controller.h>
 
 #define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET	0x200
-#define IMX8MP_AUDIOMIX_EARC_RESET_MASK		BIT(1)
-#define IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK	BIT(2)
+#define IMX8MP_AUDIOMIX_EARC_RESET_MASK		BIT(0)
+#define IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK	BIT(1)
 
 #define IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET	0x108
 #define IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK	BIT(5)
-- 
2.43.0