[PATCH 2/2] arm64: dts: imx8qm: add scu power key support

[Frank Li]

Add scu power key node.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 5206ca82eaf642a32299147e9c1b45704075e2b2..2508a07832810831d019f81d47a8f7042a77d709 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/pads-imx8qm.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -330,6 +331,12 @@ clk: clock-controller {
 			#clock-cells = <2>;
 		};
 
+		scu_key: keys {
+			compatible = "fsl,imx8qm-sc-key", "fsl,imx-sc-key";
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
 		iomuxc: pinctrl {
 			compatible = "fsl,imx8qm-iomuxc";
 		};

-- 
2.34.1