[PATCH v2] spi: imx: add i.MX51 ECSPI target mode support

[carlos.song at nxp.com]

From: Carlos Song <carlos.song at nxp.com>

ECSPI in i.MX51 and i.MX53 support target mode. Current code only support
i.MX53. Remove is_imx53_ecspi() check for target mode to support i.MX51.

Signed-off-by: Carlos Song <carlos.song at nxp.com>
---
Change for V2:
- Change patch name and commit log
- Remove target_max_transfer_bytes from devtype_data
---
 drivers/spi/spi-imx.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 64b7e977dcc1..9a1113ea4ba2 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -594,7 +594,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
 	 * is not functional for imx53 Soc, config SPI burst completed when
 	 * BURST_LENGTH + 1 bits are received
 	 */
-	if (spi_imx->target_mode && is_imx53_ecspi(spi_imx))
+	if (spi_imx->target_mode)
 		cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(channel);
 	else
 		cfg |= MX51_ECSPI_CONFIG_SBBCTRL(channel);
@@ -682,7 +682,7 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 	/* Clear BL field and set the right value */
 	ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
-	if (spi_imx->target_mode && is_imx53_ecspi(spi_imx))
+	if (spi_imx->target_mode)
 		ctrl |= (spi_imx->target_burst * 8 - 1)
 			<< MX51_ECSPI_CTRL_BL_OFFSET;
 	else {
@@ -1375,7 +1375,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	spi_imx->rx_only = ((t->tx_buf == NULL)
 			|| (t->tx_buf == spi->controller->dummy_tx));
 
-	if (is_imx53_ecspi(spi_imx) && spi_imx->target_mode) {
+	if (spi_imx->target_mode) {
 		spi_imx->rx = mx53_ecspi_rx_target;
 		spi_imx->tx = mx53_ecspi_tx_target;
 		spi_imx->target_burst = t->len;
@@ -1649,8 +1649,7 @@ static int spi_imx_pio_transfer_target(struct spi_device *spi,
 	struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
 	int ret = 0;
 
-	if (is_imx53_ecspi(spi_imx) &&
-	    transfer->len > MX53_MAX_TRANSFER_BYTES) {
+	if (transfer->len > MX53_MAX_TRANSFER_BYTES) {
 		dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
 			MX53_MAX_TRANSFER_BYTES);
 		return -EMSGSIZE;
-- 
2.34.1