[PATCH v3 2/2] PCI: j721e: Use inline reset GPIO assignment and drop local variable

Anand Moon linux.amoon at gmail.com
Mon Oct 27 02:03:06 PDT 2025


The result of devm_gpiod_get_optional() is now assigned directly
assigned to pcie->reset_gpio. This removes a superfluous local gpiod
variable, improving code readability and compactness. The functionality
remains unchanged, but the code is now more streamlined

Cc: Siddharth Vadapalli <s-vadapalli at ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli at ti.com>
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index a88b2e52fd78..ecd1b0312400 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -477,7 +477,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct j721e_pcie *pcie;
 	struct cdns_pcie_rc *rc = NULL;
 	struct cdns_pcie_ep *ep = NULL;
-	struct gpio_desc *gpiod;
 	void __iomem *base;
 	u32 num_lanes;
 	u32 mode;
@@ -589,12 +588,12 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	switch (mode) {
 	case PCI_MODE_RC:
-		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpiod)) {
-			ret = dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get reset GPIO\n");
+		pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(pcie->reset_gpio)) {
+			ret = dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
+					    "Failed to get reset GPIO\n");
 			goto err_get_sync;
 		}
-		pcie->reset_gpio = gpiod;
 
 		ret = cdns_pcie_init_phy(dev, cdns_pcie);
 		if (ret) {
@@ -616,9 +615,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		 * This shall ensure that the power and the reference clock
 		 * are stable.
 		 */
-		if (gpiod) {
+		if (pcie->reset_gpio) {
 			msleep(PCIE_T_PVPERL_MS);
-			gpiod_set_value_cansleep(gpiod, 1);
+			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
 		}
 
 		ret = cdns_pcie_host_setup(rc);
-- 
2.50.1




More information about the linux-arm-kernel mailing list