[PATCH v8 2/3] dt-bindings: PCI: pci-imx6: Add external reference clock input

Hongxing Zhu hongxing.zhu at nxp.com
Sun Oct 26 23:36:32 PDT 2025


> -----Original Message-----
> From: Conor Dooley <conor at kernel.org>
> Sent: 2025年10月25日 1:07
> To: Hongxing Zhu <hongxing.zhu at nxp.com>
> Cc: robh at kernel.org; krzk+dt at kernel.org; conor+dt at kernel.org;
> bhelgaas at google.com; Frank Li <frank.li at nxp.com>; l.stach at pengutronix.de;
> lpieralisi at kernel.org; kwilczynski at kernel.org; mani at kernel.org;
> shawnguo at kernel.org; s.hauer at pengutronix.de; kernel at pengutronix.de;
> festevam at gmail.com; linux-pci at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org;
> imx at lists.linux.dev; linux-kernel at vger.kernel.org
> Subject: Re: [PATCH v8 2/3] dt-bindings: PCI: pci-imx6: Add external reference
> clock input
> 
> On Fri, Oct 24, 2025 at 10:40:12AM +0800, Richard Zhu wrote:
> > i.MX95 PCIes have two reference clock inputs: one from internal PLL,
> > the other from off chip crystal oscillator. The "extref" clock refers
> > to a reference clock from an external crystal oscillator.
> >
> > Add external reference clock input for i.MX95 PCIes.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> > Reviewed-by: Frank Li <Frank.Li at nxp.com>
> > ---
> >  Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> > b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> > index ca5f2970f217c..b4c40d0573dce 100644
> > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> > @@ -212,14 +212,17 @@ allOf:
> >      then:
> >        properties:
> >          clocks:
> > +          minItems: 4
> >            maxItems: 5
> >          clock-names:
> > +          minItems: 4
> >            items:
> >              - const: pcie
> 
> 1
> 
> >              - const: pcie_bus
> 
> 2
> 
> >              - const: pcie_phy
> 
> 3
> 
> >              - const: pcie_aux
> 
> 4
> 
> >              - const: ref
> 
> 5
> 
> > +            - const: extref  # Optional
> 
> 6
> 
> There are 6 clocks here, but clocks and clock-names in this binding do not
> permit 6:
> |  clocks:
> |    minItems: 3
> |    items:
> |      - description: PCIe bridge clock.
> |      - description: PCIe bus clock.
> |      - description: PCIe PHY clock.
> |      - description: Additional required clock entry for imx6sx-pcie,
> |           imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
> |      - description: PCIe reference clock.
> |
> |  clock-names:
> |    minItems: 3
> |    maxItems: 5
> 
> AFAICT, what this patch actually did is make "ref" an optional clock, but the
> claim in the patch is that extref is optional. With this patch applied, you can
> have a) no reference clocks or b) only "ref". "extref"
> is never allowed. 
Hi Conor:
Thanks for your review comments.
Just same to "extref", the "ref" should be marked as optional clock too.

> 
> Is it supposed to be possible to have "ref" and "extref"?
> Or "extref" without "ref"?
> Neither "ref" or "extref"?
"ref" and "extref" have an exclusive relationship of choosing one of the two,
 and they cannot all exist simultaneously.

> I don't know the answer to that question because you're doing things that
> are contradictory in your patch and the commit message isn't clear.
> 
Sorry for causing you confusion.


Best Regards
Richard Zhu

> I don't see how this can have been successfully tested.
> 
> pw-bot: changes-requested



More information about the linux-arm-kernel mailing list