[PATCH v7 4/5] media: imx8mq-mipi-csi2: Add support for i.MX8ULP

[Laurent Pinchart]

On Thu, Oct 23, 2025 at 05:19:45PM +0800, Guoniu Zhou wrote:
> From: Guoniu Zhou <guoniu.zhou at nxp.com>
> 
> The CSI-2 receiver in i.MX8ULP is almost same as i.MX8QXP/QM except
> clocks and resets, so add compatible string for i.MX8ULP to handle
> the difference and reuse platform data of i.MX8QXP/QM.
> 
> Reviewed-by: Frank Li <Frank.Li at nxp.com>
> Signed-off-by: Guoniu Zhou <guoniu.zhou at nxp.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
>  drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> index fd788a7f48e5feeff658e3d2347db6fefca5d0cf..d8fadb0f1b6b670110ee98a74cffd56a6c96592b 100644
> --- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> +++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> @@ -1069,6 +1069,7 @@ static void imx8mq_mipi_csi_remove(struct platform_device *pdev)
>  static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
>  	{ .compatible = "fsl,imx8mq-mipi-csi2", .data = &imx8mq_data },
>  	{ .compatible = "fsl,imx8qxp-mipi-csi2", .data = &imx8qxp_data },
> +	{ .compatible = "fsl,imx8ulp-mipi-csi2", .data = &imx8qxp_data },
>  	{ /* sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);

-- 
Regards,

Laurent Pinchart