[PATCH 2/3] media: nxp: imx8-isi: Keep the default value for BLANK_PXL field

[Laurent Pinchart]

On Fri, Oct 24, 2025 at 09:41:50AM -0400, Frank Li wrote:
> On Fri, Oct 24, 2025 at 05:46:53PM +0800, Guoniu Zhou wrote:
> > From: Guoniu Zhou <guoniu.zhou at nxp.com>
> >
> > The field provides the value of the blank pixel to be inserted in the
> 
> The field BLANK_PXL provides
> 
> > image in case an overflow error occurs in the output buffers of the
> > channel. Its default value is 0xff, so no need to set again.
> >
> > Besides, the field only exist in i.MX8QM/XP ISI version. Other versions
> > like mscale series, remove the field since it won't send data to AXI bus

What's the mscale series ? Is that i.MX 8M ?

> > when overflow error occurs and set the field as reserved. i.MX9 series
> 
> mark BLANK_PXL as reserved. i.MX9 series use it for other purposes.
> 
> Reviewed-by: Frank Li <Frank.Li at nxp.com>
> 
> > use the field as other purposes.
> >
> > Signed-off-by: Guoniu Zhou <guoniu.zhou at nxp.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> > ---
> >  drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c | 6 ++----
> >  1 file changed, 2 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> > index 9225a7ac1c3ee7e42e64983982eb4b6c27e356fe..0187d4ab97e8e28fca9013f6864a094e08f2c570 100644
> > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
> > @@ -309,8 +309,8 @@ static void mxc_isi_channel_set_control(struct mxc_isi_pipe *pipe,
> >
> >  	val = mxc_isi_read(pipe, CHNL_CTRL);
> >  	val &= ~(CHNL_CTRL_CHNL_BYPASS | CHNL_CTRL_CHAIN_BUF_MASK |
> > -		 CHNL_CTRL_BLANK_PXL_MASK | CHNL_CTRL_SRC_TYPE_MASK |
> > -		 CHNL_CTRL_MIPI_VC_ID_MASK | CHNL_CTRL_SRC_INPUT_MASK);
> > +		 CHNL_CTRL_SRC_TYPE_MASK | CHNL_CTRL_MIPI_VC_ID_MASK |
> > +		 CHNL_CTRL_SRC_INPUT_MASK);
> >
> >  	/*
> >  	 * If no scaling or color space conversion is needed, bypass the
> > @@ -323,8 +323,6 @@ static void mxc_isi_channel_set_control(struct mxc_isi_pipe *pipe,
> >  	if (pipe->chained)
> >  		val |= CHNL_CTRL_CHAIN_BUF(CHNL_CTRL_CHAIN_BUF_2_CHAIN);
> >
> > -	val |= CHNL_CTRL_BLANK_PXL(0xff);
> > -
> >  	/* Input source (including VC configuration for CSI-2) */
> >  	if (input == MXC_ISI_INPUT_MEM) {
> >  		/*

-- 
Regards,

Laurent Pinchart