[PATCH v1 0/2] arm64: dts: freescale: add Toradex SMARC iMX95

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

This series adds support for the Toradex SMARC iMX95 SoM and the
Toradex SMARC Development Board.

The module consists of an NXP i.MX95 family SoC, up to 16GB of LPDDR5
RAM and up to 128GB of storage, a USB 3.0 Host Hub and 2.0 OTG, two
Gigabit Ethernet PHYs, a 10 Gigabit Ethernet interface, an I2C EEPROM
and Temperature Sensor, an RX8130 RTC, a Quad/Dual lane CSI interface,
and some optional addons: TPM 2.0, DSI, LVDS, DisplayPort (through a
DSI-DP bridge), and Wi-Fi/BT module.

Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit

João Paulo Gonçalves (1):
  dt-bindings: arm: fsl: add Toradex SMARC iMX95

Max Krummenacher (1):
  arm64: dts: freescale: add Toradex SMARC iMX95

 .../devicetree/bindings/arm/fsl.yaml          |    6 +
 arch/arm64/boot/dts/freescale/Makefile        |    1 +
 .../dts/freescale/imx95-toradex-smarc-dev.dts |  277 ++++
 .../dts/freescale/imx95-toradex-smarc.dtsi    | 1153 +++++++++++++++++
 4 files changed, 1437 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi

-- 
2.39.5