[PACTH v2] spi: imx: add 16/32 bits per word support for target mode

[Frank Li]

On Fri, Oct 24, 2025 at 07:31:07PM +0800, carlos.song at nxp.com wrote:
> From: Carlos Song <carlos.song at nxp.com>
>
> Now for ECSPI only support 8 bits per word in target mode.
> Enable 16/32 bits per word support for spi-imx target mode.
>
> Signed-off-by: Carlos Song <carlos.song at nxp.com>
> Signed-off-by: Clark Wang <xiaoning.wang at nxp.com>
> ---
>  drivers/spi/spi-imx.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 155ddeb8fcd4..017f83f5dfdf 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -424,8 +424,12 @@ static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
>
>  static void mx53_ecspi_rx_target(struct spi_imx_data *spi_imx)
>  {
> -	u32 val = ioread32be(spi_imx->base + MXC_CSPIRXDATA);
> +	u32 val = readl(spi_imx->base + MXC_CSPIRXDATA);
>
> +	if (spi_imx->bits_per_word <= 8)
> +		swab32s(&val);
> +	else if (spi_imx->bits_per_word <= 16)
> +		swahw32s(&val);

Needn't swap when bits_per_word > 24, like 32? or our hardware max support
to 16?

Frank
>  	if (spi_imx->rx_buf) {
>  		int n_bytes = spi_imx->target_burst % sizeof(val);
>
> @@ -453,12 +457,16 @@ static void mx53_ecspi_tx_target(struct spi_imx_data *spi_imx)
>  	if (spi_imx->tx_buf) {
>  		memcpy(((u8 *)&val) + sizeof(val) - n_bytes,
>  		       spi_imx->tx_buf, n_bytes);
> +		if (spi_imx->bits_per_word <= 8)
> +			swab32s(&val);
> +		else if (spi_imx->bits_per_word <= 16)
> +			swahw32s(&val);
>  		spi_imx->tx_buf += n_bytes;
>  	}
>
>  	spi_imx->count -= n_bytes;
>
> -	iowrite32be(val, spi_imx->base + MXC_CSPITXDATA);
> +	writel(val, spi_imx->base + MXC_CSPITXDATA);
>  }
>
>  /* MX51 eCSPI */
> --
> 2.34.1
>