[PATCH v1 5/7] arm64: dts: imx8qxp-mek: Add vpcie3v3aux regulator for PCIe M.2 connector

[Richard Zhu]

Refer to PCI Express M.2 Specification r5.1 sec3.1.1 Power Sources and
Grounds.

PCI Express M.2 Socket 1 utilizes a 3.3 V power source. The voltage
source, 3.3 V, is expected to be available during the system’s
stand-by/suspend state to support wake event processing on the
communications card.

Add vpcie3v3aux regulator to let this 3.3 V power source always on for
PCIe M.2 Key E connector on i.MX8QXP MEK board.

Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 7b03374455410..521e1be710d73 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -631,6 +631,7 @@ &pcie0 {
 	pinctrl-names = "default";
 	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcieb>;
+	vpcie3v3aux-supply = <&reg_pcieb>;
 	status = "okay";
 };
 
-- 
2.37.1