[PATCH 1/4 v3] dt-bindings: PCI: s32g: Add NXP PCIe controller

[Vincent Guittot]

On Wed, 22 Oct 2025 at 21:18, Frank Li <Frank.li at nxp.com> wrote:
>
> On Wed, Oct 22, 2025 at 07:43:06PM +0200, Vincent Guittot wrote:
> > Describe the PCIe host controller available on the S32G platforms.
> >
> > Co-developed-by: Ionut Vicovan <Ionut.Vicovan at nxp.com>
> > Signed-off-by: Ionut Vicovan <Ionut.Vicovan at nxp.com>
> > Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman at nxp.com>
> > Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman at nxp.com>
> > Co-developed-by: Larisa Grigore <larisa.grigore at nxp.com>
> > Signed-off-by: Larisa Grigore <larisa.grigore at nxp.com>
> > Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc at nxp.com>
> > Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc at nxp.com>
> > Co-developed-by: Ciprian Marian Costea <ciprianmarian.costea at nxp.com>
> > Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea at nxp.com>
> > Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc at nxp.com>
> > Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc at nxp.com>
> > Signed-off-by: Vincent Guittot <vincent.guittot at linaro.org>
> > ---
> >  .../bindings/pci/nxp,s32g-pcie.yaml           | 102 ++++++++++++++++++
> >  1 file changed, 102 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
> > new file mode 100644
> > index 000000000000..2d8f7ad67651
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
> > @@ -0,0 +1,102 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/nxp,s32g-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP S32G2xxx/S32G3xxx PCIe Root Complex controller
> > +
> > +maintainers:
> > +  - Bogdan Hamciuc <bogdan.hamciuc at nxp.com>
> > +  - Ionut Vicovan <ionut.vicovan at nxp.com>
> > +
> > +description:
> > +  This PCIe controller is based on the Synopsys DesignWare PCIe IP.
> > +  The S32G SoC family has two PCIe controllers, which can be configured as
> > +  either Root Complex or Endpoint.
> > +
> > +allOf:
> > +  - $ref: /schemas/pci/snps,dw-pcie.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - enum:
> > +          - nxp,s32g2-pcie
> > +      - items:
> > +          - const: nxp,s32g3-pcie
> > +          - const: nxp,s32g2-pcie
> > +
> > +  reg:
> > +    maxItems: 6
> > +
> > +  reg-names:
> > +    items:
> > +      - const: dbi
> > +      - const: dbi2
> > +      - const: atu
> > +      - const: dma
> > +      - const: ctrl
> > +      - const: config
> > +
> > +  interrupts:
> > +    maxItems: 2
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: dma
> > +      - const: msi
>
> Most likely dma irq is optional irq, seldom use built-in edma in RC mode.
> so put msi to the first.
>
> interrupt-names:
>   items:
>     - const: msi
>     - const: dma
>   minItems: 1
>
> missed phys
>
> phys:
>   maxItems: 1

okay

>
> Frank
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - interrupts
> > +  - interrupt-names
> > +  - ranges
> > +  - phys
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/phy/phy.h>
> > +
> > +    bus {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        pcie at 40400000 {
> > +            compatible = "nxp,s32g3-pcie",
> > +                         "nxp,s32g2-pcie";
> > +            reg = <0x00 0x40400000 0x0 0x00001000>,   /* dbi registers */
> > +                  <0x00 0x40420000 0x0 0x00001000>,   /* dbi2 registers */
> > +                  <0x00 0x40460000 0x0 0x00001000>,   /* atu registers */
> > +                  <0x00 0x40470000 0x0 0x00001000>,   /* dma registers */
> > +                  <0x00 0x40481000 0x0 0x000000f8>,   /* ctrl registers */
> > +                  <0x5f 0xffffe000 0x0 0x00002000>;  /* config space */
> > +            reg-names = "dbi", "dbi2", "atu", "dma", "ctrl", "config";
> > +            dma-coherent;
> > +            #address-cells = <3>;
> > +            #size-cells = <2>;
> > +            device_type = "pci";
> > +            ranges =
> > +                     <0x81000000 0x0 0x00000000 0x5f 0xfffe0000 0x0 0x00010000>,
> > +                     <0x82000000 0x0 0x00000000 0x58 0x00000000 0x0 0x80000000>,
> > +                     <0x82000000 0x1 0x00000000 0x59 0x00000000 0x6 0xfffe0000>;
> > +
> > +            bus-range = <0x0 0xff>;
> > +            interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> > +            interrupt-names = "dma", "msi";
> > +            #interrupt-cells = <1>;
> > +            interrupt-map-mask = <0 0 0 0x7>;
> > +            interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 2 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 3 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 4 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +            phys = <&serdes0 PHY_TYPE_PCIE 0 0>;
> > +        };
> > +    };
> > --
> > 2.43.0
> >