[PATCH] spi: imx: support SPI target PIO mode for IMX51_ECSPI

[carlos.song at nxp.com]

From: Carlos Song <carlos.song at nxp.com>

IMX51_ECSPI and IMX53_ECSPI both has target mode, but now PIO target mode
is only supported for IMX53_ECSPI.

Support target PIO mode for IMX51_ECSPI. It can share the same functions
for data transmission and reception in target mode with IMX53_ECSPI. So
remove target mode restriction only for IMX53_ECSPI and move target max
transfer len to devtype_data of IMX53_ECSPI and IMX51_ECSPI to improve
readability.

Signed-off-by: Carlos Song <carlos.song at nxp.com>
---
 drivers/spi/spi-imx.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 6eb4bfb7be4a..cd40db61d8d1 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -85,6 +85,7 @@ struct spi_imx_devtype_data {
 	void (*disable)(struct spi_imx_data *spi_imx);
 	bool has_dmamode;
 	bool has_targetmode;
+	int target_max_transfer_bytes;
 	unsigned int fifo_size;
 	bool dynamic_burst;
 	/*
@@ -594,7 +595,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx,
 	 * is not functional for imx53 Soc, config SPI burst completed when
 	 * BURST_LENGTH + 1 bits are received
 	 */
-	if (spi_imx->target_mode && is_imx53_ecspi(spi_imx))
+	if (spi_imx->target_mode)
 		cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(channel);
 	else
 		cfg |= MX51_ECSPI_CONFIG_SBBCTRL(channel);
@@ -682,7 +683,7 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 	/* Clear BL field and set the right value */
 	ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
-	if (spi_imx->target_mode && is_imx53_ecspi(spi_imx))
+	if (spi_imx->target_mode)
 		ctrl |= (spi_imx->target_burst * 8 - 1)
 			<< MX51_ECSPI_CTRL_BL_OFFSET;
 	else {
@@ -1140,6 +1141,7 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
 	.has_dmamode = true,
 	.dynamic_burst = true,
 	.has_targetmode = true,
+	.target_max_transfer_bytes = MX53_MAX_TRANSFER_BYTES,
 	.disable = mx51_ecspi_disable,
 	.devtype = IMX51_ECSPI,
 };
@@ -1154,6 +1156,7 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.fifo_size = 64,
 	.has_dmamode = true,
 	.has_targetmode = true,
+	.target_max_transfer_bytes = MX53_MAX_TRANSFER_BYTES,
 	.disable = mx51_ecspi_disable,
 	.devtype = IMX53_ECSPI,
 };
@@ -1170,6 +1173,7 @@ static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
 	.has_dmamode = true,
 	.dynamic_burst = true,
 	.has_targetmode = true,
+	.target_max_transfer_bytes = MX53_MAX_TRANSFER_BYTES,
 	.tx_glitch_fixed = true,
 	.disable = mx51_ecspi_disable,
 	.devtype = IMX51_ECSPI,
@@ -1375,7 +1379,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	spi_imx->rx_only = ((t->tx_buf == NULL)
 			|| (t->tx_buf == spi->controller->dummy_tx));
 
-	if (is_imx53_ecspi(spi_imx) && spi_imx->target_mode) {
+	if (spi_imx->target_mode) {
 		spi_imx->rx = mx53_ecspi_rx_target;
 		spi_imx->tx = mx53_ecspi_tx_target;
 		spi_imx->target_burst = t->len;
@@ -1649,8 +1653,7 @@ static int spi_imx_pio_transfer_target(struct spi_device *spi,
 	struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
 	int ret = 0;
 
-	if (is_imx53_ecspi(spi_imx) &&
-	    transfer->len > MX53_MAX_TRANSFER_BYTES) {
+	if (transfer->len > spi_imx->devtype_data->target_max_transfer_bytes) {
 		dev_err(&spi->dev, "Transaction too big, max size is %d bytes\n",
 			MX53_MAX_TRANSFER_BYTES);
 		return -EMSGSIZE;
-- 
2.34.1