[PATCH v4 10/12] dt-bindings: pinctrl: stm32: Use properties from pincfg-node.yaml

[Conor Dooley]

On Thu, Oct 23, 2025 at 03:26:58PM +0200, Antonio Borneo wrote:
> Don't re-declare the standard pincfg properties; take them from
> the default schema.
> 
> Signed-off-by: Antonio Borneo <antonio.borneo at foss.st.com>

I acked this one in v3:
https://lore.kernel.org/all/20251014-privatize-unnerving-bb26a0626276@spud/
Acked-by: Conor Dooley <conor.dooley at microchip.com>
pw-bot: not-applicable

> ---
>  .../bindings/pinctrl/st,stm32-pinctrl.yaml    | 27 ++++++++-----------
>  1 file changed, 11 insertions(+), 16 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> index 961161c2ab62b..27c0dd7a8df01 100644
> --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> @@ -151,6 +151,8 @@ patternProperties:
>            pinctrl group available on the machine. Each subnode will list the
>            pins it needs, and how they should be configured, with regard to muxer
>            configuration, pullups, drive, output high/low and output speed.
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
> +
>          properties:
>            pinmux:
>              $ref: /schemas/types.yaml#/definitions/uint32-array
> @@ -195,26 +197,19 @@ patternProperties:
>                            pinmux = <STM32_PINMUX('A', 9, RSVD)>;
>                 };
>  
> -          bias-disable:
> -            type: boolean
> +          bias-disable: true
>  
> -          bias-pull-down:
> -            type: boolean
> +          bias-pull-down: true
>  
> -          bias-pull-up:
> -            type: boolean
> +          bias-pull-up: true
>  
> -          drive-push-pull:
> -            type: boolean
> +          drive-push-pull: true
>  
> -          drive-open-drain:
> -            type: boolean
> +          drive-open-drain: true
>  
> -          output-low:
> -            type: boolean
> +          output-low: true
>  
> -          output-high:
> -            type: boolean
> +          output-high: true
>  
>            slew-rate:
>              description: |
> @@ -222,8 +217,8 @@ patternProperties:
>                1: Medium speed
>                2: Fast speed
>                3: High speed
> -            $ref: /schemas/types.yaml#/definitions/uint32
> -            enum: [0, 1, 2, 3]
> +            minimum: 0
> +            maximum: 3
>  
>          required:
>            - pinmux
> -- 
> 2.34.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20251023/93d7deab/attachment.sig>