[PATCH v3 03/10] dt-bindings: soc: samsung: gs101-pmu: allow power domains as children

[Krzysztof Kozlowski]

On Thu, Oct 16, 2025 at 04:58:36PM +0100, André Draszik wrote:
> The power domains are a property of / implemented in the PMU. As such,
> they should be modelled as child nodes of the PMU.
> 
> Signed-off-by: André Draszik <andre.draszik at linaro.org>
> 
> ---
> Note: Ideally, the newly added properties (ranges, etc.) should only be
> 'required' if "^power-domain@[0-9a-f]+$" exists as a patternProperty,
> as they're needed only in that case. As-is, this patch now causes
> warnings for existing DTs as they don't specify the new properties (and
> they shouldn't need to). Only if DTs are updated to include
> power-domains, such an update should also add the new properties.
> 
> I've not been able to come up with the correct schema syntax to achieve
> that. dependencies, dependentRequired, and dependentSchemas don't seem
> to support patterns. Similarly,
>   - if:
>       required:
>         - ...
>     then:
>       required:
>         - ...
> 
> doesn't allow patterns in the 'if' block (or I didn't get the syntax
> right).
> 
> Rob said in
> https://lore.kernel.org/all/20251010141357.GA219719-robh@kernel.org/
> that this is a known limitation in json-schema.
> ---
>  .../bindings/soc/google/google,gs101-pmu.yaml      | 40 ++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/google/google,gs101-pmu.yaml b/Documentation/devicetree/bindings/soc/google/google,gs101-pmu.yaml
> index f7119e7a39a3fe0a0a23d1faa251d356f83ba501..a24390f6d2a54afe1aa84935e03f719a62f4fc8e 100644
> --- a/Documentation/devicetree/bindings/soc/google/google,gs101-pmu.yaml
> +++ b/Documentation/devicetree/bindings/soc/google/google,gs101-pmu.yaml
> @@ -26,6 +26,14 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
> +  ranges: true
> +
>    reboot-mode:
>      $ref: /schemas/power/reset/syscon-reboot-mode.yaml
>      type: object
> @@ -49,9 +57,23 @@ properties:
>      description:
>        Phandle to PMU interrupt generation interface.
>  
> +patternProperties:
> +  "^power-domain@[0-9a-f]+$":

Keep consistent quotes, ' or "

The problem is that you mix children without and with unit address. I
guess that's the limitation of syscon-xxx drivers because they could
take the reg/unit-address, so it's fine.

Best regards,
Krzysztof